Barry Idmess Darkroom Equipment

Darkroom Trays

Printing For Profit in Platinum From Digital Negatives - The Concise Guide - Part 4/7

Part 4/7 - Darkroom techniques.

COATING. Start mixing the solution in a short glass. For an 8x10" print I use 15 drops of ferric oxalate, 15 of palladium/platinum, and 1 drop of Na2 at 2.5%. Many books recommend more. I do not think it is necessary, for 30 drops of solution will cover an 8x10" print very well even with a brush.

Note: At this point you may think that the percentage of Na2 should vary depending on the print and one can not just say "one drop of Na2 at 2.5%". This is indeed not true, for you already have the correct contrast sorted in the negative, hence ALL you digital images will print well with just ONE drop of 2.5% Na2 contrast agent. Also, ALL your prints (on the same paper) will print with the same exposure, in my case this is ~4 minutes but this time of course depends on the UV unit and you will find your own time.

With digital negatives, the printing process itself is almost routine and can not go wrong, because the negative is, in fact, spot on and perfect. Of course, getting this 'perfection' in the negative may take some time and tweaking.

Some may think that just one drop of 2.5% Na2 may be too little and the prints will show some fogging. I have never experienced this probably because of the small quantity of oxalic acid added to the ferric oxalate solution. Keep in mind that Na2 is a very powerful contrast agent. If you want, you can use one drop at 5%, this will also leave some room should your print show too much contrast. If you decide to do so, of course, you will have to modify slightly your Photoshop curve, as described in Part 5. Personally, I have always been using one drop at 2.5%.

Once you have the solution ready, fill/empty the syringe in the glass 3 or 4 times to mix the solution thoroughly. Get the brush and pour some little water on it, then dry it with a tissue but be sure to leave it a bit moist. Take the sheet of paper and the negative that you are going to print. Lay the negative on the paper and look at it for 5 seconds to make a visual image of where to coat (this is sufficient you do not need to draw amateurish pencil lines or make templates to limit the coating area). Remove the negative (put it back in its envelope and do not leave it exposed near the coating area or small drops of solution will inevitably land on it when coating) and get the brush, with the same hand also get the syringe. I am right handed so I quickly squirt the solution in a line from left to right along the long side of the paper. You want to form a nice long bead in the center of the paper, this does not work well if you pour the solution from a glass, hence the syringe (without needle of course!). Immediately pass the empty syringe to the other hand (which you will use to hold the paper down too) and start coating in large vertical stripes first, then horizontal and repeat until the entire area (of which you still have a visual image in your mind) is perfectly covered. No need to push hard on the brush, its own weight will be plenty. Be accurate and swift in this for the goal is coating well the paper with less solution as possible of course. If you end up with huge black borders it obviously means that you are over coating, if the negative can not fit the coated area it means, of course, that you are under coating. Some experts recommend a chemical called Tween20 to facilitate coating, to me this product has always proved to be useless. You can get yourself started practicing with something not expensive such as coffee and photocopy paper. Soon you will be able to cover the entire area leaving a nice and thin black border all around the print all by eye.

After this is done, leave the freshly coated paper to dry (I cover it temporarily with a cardboard lid for protection from light, bugs, dust etc). After about two minutes (just to allow the solution to penetrate the paper) put the sheet under the drier for another two or three minutes. Do not leave the paper to air dry too long or the solution will 'go through' the paper and the image will look weak. On the other hand you must allow some time before hot drying to allow the metals to penetrate and give the print the famous 'platinum presence'. You will have to experiment a bit with these times, also depending on your climate and time of the year, humidity etc., not that it makes such a huge difference anyway. Just, as said throughout these articles, be consistent and always follow the same procedures and timing.

While the paper is drying, you can wash glass, brush and syringe, ready for your next print. What if you break a rule and do not wash them: in this case, your next print will require (considerable) less solution, like 11 drops instead of 15, a great way to save money. This is possible because, as said, all our prints use the same mix (contrast agent etc). Or, you can group the prints with the same contrast/mix before starting your printing session. However, even though it does work, I do not do this, because when I started there were no digital negatives and each negative would of course require its own (different) contrast mix, and I am used to that procedure. Also, it makes me uncomfortable (sort of cheating?). Consider this not a recommendation but a possible working trick to save some money especially when making additional prints from the same negative. Be careful: whatever your procedure, if the print has not received adequate coating, it will look quite anemic and weak. You can experiment making a test print (maybe along with a step wedge) with more or less solution and see if there is any difference.

Once the paper is dry, briefly inspect it, it should exhibit a nice and uniform orange coating. If there are flaws, like maybe small dots, you will take care of these when spotting. In fact, whatever you see on the coated paper now there is little you can do. If you see a bristle from the brush, you can try to lift it off with a scalpel. I have never experienced this with my Grumbacher though. With Cranes, depending on the batch, sometimes some small areas look lighter when seen through the light. These spots will disappear once the print is made and dry so do not worry. If there are major flaws, like thin uncoated areas, it might be a good chance to experiment with double coating, for example.

Now place the paper on the contact printing frame, then the negative and the glass and put them inside the UV unit for the required exposure. During this time you can coat another sheet for your next print or, if you are not so busy, just relax.

DEVELOPING. Now it is the moment for some magic. Just take the exposed sheet of paper and slide it swiftly in the developer tray from one side, you want it to "cut" through the surface of the solution. Some people keep the solution in a jug and splash it over the print but I do not agree with this technique. Others tilt the tray to leave a dry area at the bottom where they lay the paper and then allow the solution to cover the paper, I would not do this either. From now on, please keep in mind that we are working with water color paper that is not supposed to stay almost one hour in chemicals and running water, hence it will become very fragile, so take extreme care when handling. The image will develop immediately. It is generally recommended to let the print in the developer for one to two minutes, I have found that one minute is sufficient and there is no change in the image keeping the print longer than that (this is not silver printing). I have, however, standardized my procedure to 1,5 minutes. The temperature of the developer will have some effect on the final color (higher temperature = warmer color). I have a sort of big dish warmer under the tray even though I seldom use it, because I like the color I get at room temperature with the added benefit that of course the developer will last longer.

After developing the print, lift it and drain very well and take it to the washing tray for a quick wash, this will make the clearing solution last longer. Then you just start the clearing process passing the print from the first to the third tray (4/5 minutes each, rocking them gently every now and then, especially in the first tray) and finally in the washer for no more than 30 minutes. After washing, drain well, then get two sheets of blotting paper and gently and carefully absorb all the water from the print. If you press too much the blotting paper will leave marks in the print. At this point the print is ready for air drying on a mesh (face up, another difference from silver printing). You can inspect it but keep in mind that once dry it will be considerable darker, especially the highlights. If the print looks OK wet you can be sure that it will look too dark once dry. If you see any flaw in the print (black spots, dust, hair or whatever) do not even try to touch its surface with your finger because it will leave a mark on it. Put the blotting paper sheets to dry too, do not use them again with your next print. By the way, do not buy those blotting paper books, they tend to develop mold and will become all warped. Buy loose sheets and take care of them, or replace often. After this, you will be ready to make another print, or if you are done, just put the developer back in its bottle and wash the trays. Every printing session, I also clean the glass of the contact printing frame.

I usually leave my prints to dry overnight. If you are in a hurry, you can dry a print in the same hot air drying unit used with coated sheets, but it will not dry very flat and also you do not want to stress the paper fibers. I hot dry sometimes to quickly evaluate some prints. After the print is dry, you can assess it. The first print from a new negative, of course, needs a full evaluation, additional prints from the same negative, if you are consistent in the darkroom, will only need a quick check. I mask the black borders with a bevel window cut sheet of my usual mounting board, to avoid ruining the shadows in the print. I generally check the print in average light conditions, certainly not under a strong fluorescent light of course and not in the darkroom. If I am happy with the print I proceed with spotting (once flat), if I am not, it means that there is something wrong with the negative so back to Photoshop to make another one. Keep in mind that we are striving to get a good, easy to print negative, and Pictorico film is not terribly expensive, so, at least in my case, I find more convenient to make another negative.

Of course, you still have some control in the darkroom. If the print is flat you can use more contrast agent, if it is too dark or too light you can change exposure time a little. If the print is too punchy and contrasty the only solution is to make another negative. If there are areas in need of burning or dodging, which is an annoying procedure when contact printing under UV, it is better to do the corrections in Photoshop and make another negative.

Sometimes you will find that technically the print is OK yet it does not work, which means that you must develop an aesthetic correlation between what you see on the screen and what the finished print will look. In some way, what Ansel Adams called "pre-visualization". In his method, pre-visualizing the actual print when looking at the camera's ground glass, in our case, it is something similar but we are looking at a computer screen. A last thought on assessing platinum and especially palladium prints: the print should be beautiful and with good "presence". The shadows should be thick and juicy, and the highlights should almost glow, i.e. be "light". If this is not the case, often the problem is that you are printing too dark. Often people, coming from other printing processes, especially silver, follow the same visual accomplishments they were used to, with harsh contrast and deep shadows, which in my opinion is wrong in pt-pd (although there are many different schools on this). Often the mid tones are printed too dark, which is an easy fix with Photoshop. Especially with portraiture and landscapes try to stay less contrasty than you think, more "delicate".
Further details on this in Part 5, making the digital negative.

About the Author

Luca Paradisi has been an internationally collected artist and fine art printmaker for many years. For more fine art photography inspiration you can visit his web site at artblackandwhite.com where he shows his work which includes landscapes, still life, abstracts, and architectural.

Darkroom $19.95 Darkroom: A Memoir in Black and White is an arresting and moving personal story about childhood, race, and identity in the American South, rendered in stunning illustrations by the author, Lila Quintero Weaver.   In 1961, when Lila was five, she and her family emigrated from Buenos Aires, Argentina, to Marion, Alabama, in the heart of Alabama’s Black Belt. As educated, middle-class Latino immigrants in a region that was defined by segregation, the Quinteros occupied a privileged vantage from which to view the racially charged culture they inhabited. Weaver and her family were firsthand witnesses to key moments in the civil rights movement.  But Darkroom is her personal story as well: chronicling what it was like being a Latina girl in the Jim Crow South, struggling to understand both a foreign country and the horrors of our nation’s race relations. Weaver, who was neither black nor white, observed very early on the inequalities in the American culture, with its blonde and blue-eyed feminine ideal. Throughout her life, Lila has struggled to find her place in this society and fought against the discrimination around her.

Trays $545 "Graceful and lightweight, Kartell Trays provide durable and stylish surfaces for the home or office. Reminiscent of Japanese lacquer boxes, Trays fulfills storage and display requirements in an unassuming, minimalist way. Available in a myriad of different sizes in glossy black or white, Trays fit in where they're needed and complement current decor. "

The Darkroom Cookbook $39.95 The art of darkroom developing and printing will never go out of style. Master darkroom specialist Steve Anchell is back to prove it in this long-awaited third edition of his enormously successful Darkroom Cookbook. Packed with over 200 "recipes," some common and others rare gems, you'll discover something new every time you open this guide, whether you're new to the darkroom or have been making your own prints for years. In addition to the formulas, you'll find tons of useful information on developers, push-processing, where to get darkroom equipment, how to set up your own darkroom, how to work and play in your darkroom safely, and much more. This handy guide will become a constant companion for every darkroom enthusiast creating prints at home or in the studio. In addition to complete updates throughout to reflect changes in the availability of chemicals and equipment, this third edition contains all new information on: *Reversal processing *Enlarged negatives *Pyro formulas *Plus expanded sections on printing, pyro, and toning prints Also included for the first time are special technique contributions as well as stunning black and white imagery by Bruce Barnbaum, Rod Dresser, Jay Dusard, Patrick Gainer, Richard Garrod, Henry Gilpin, Gordon Hutchings, Sandy King, Les McLean, Sa?d Nuseibeh, France Scully Osterman, Mark Osterman, Tim Rudman, Ryuijie, John Sexton, and John Wimberly. Be sure to visit www.darkroomcookbook.com to find useful links, an interactive user forum, and more! Steve Anchell is a photographer and author of The Variable Contrast Printing Manual, and co-author of The Film Developing Cookbook. He has been teaching darkroom and photography workshops since 1979. Steve is a member of the Freestyle Advisory Board of Photographic Professionals. "With its unrivalled collection of photographic formulae and easy to understand explanations of photographic processes, The Darkroom Cookbook has long been a favorite with darkroom workers everywhere. Now, with further additions to its formulary, more topics, and contributions by renowned darkroom experts, this new edition promises to be an indispensable Aladdin's Cave resource to darkroom enthusiasts of all levels." -Tim Rudman, photographer and author "The Darkroom Cookbook is an essential compendium of photographic information for anyone interested in high-quality darkroom work." -John Sexton, photographer *Packed with rare techniques for silver-based processing clearly explained by a darkroom master so you can create your own stunning prints at home or in the studio *Contains over 200 formulas - follow along step-by-step, or experiment with your own variations to develop new recipes! *Includes a brand-new chapter on analog variable contrast printing *Visit the new supplemental website to find useful links and an interactive user forum

Early Darkroom Equipment $79.99 Early Darkroom Equipment - Premium Photographic Print

Personnel Working at Mobile Darkroom $79.99 Personnel Working at Mobile Darkroom - Premium Photographic Print

The Photoshop Darkroom $39.95 The Photoshop Darkroom offers limitless possibilities for photographers looking for jaw-dropping results, using powerful and innovative creative post-processing techniques. If you want folks to ask "How did you do that?" then this is the book for you! The images in The Photoshop Darkroom will inspire you and help you unleash your creative potential. You'll learn to view your own digital photography with new eyes. Step-by-step directions show you real-world examples of how to achieve the results you want from your photography and post-processing. *Learn how to work with RAW image files *Understand the Photoshop darkroom workflow *Multi-process RAW files *Extend the dynamic range of your photographs *Create High Dynamic Range (HDR) images by hand *Create stunning black and white imagery with Photoshop *Use layers and masking for compositing *Create striking color effects using LAB color

Darkroom (Paperback) $33.51 In the aftermath of her mother`s suicide, one young woman recognizes the malleability of her reality. From her adolescence in the flat, hot Floridian landscape to a tectonic Missouri adulthood, a girl shaped by grief is compelled to create and manipulate her image of the world. As her dreams become indistinguishable from daily life, she begins to question memory, identity, and the function of love. Employing photography as its central metaphor, Darkroom tackles the tangled relationship between memory and mourning by exploring an artist`s impossible attempt to re-create the object of loss.

Darkroom Widescreen $6.25 Rated: NRSynopsis: He was found 15 years ago wandering a road near the woods, covered in dirt and blood with no name or memory. But when this now-grown mental patient is given an experimental new drug, he suddenly begins to have horrific visions of a beast that slaughters beautiful young women. Escaping from the institution, he is befriended by a teenage outcast who needs the stranger's help to unlock a few frantic secrets of his own. Together, the two will discover the violence of their pasts, the evil in their future, and the shocking secret that waits deep inside The Darkroom.

The New Darkroom Handbook $52.95 The Darkroom Handbook, Second Edition, is a completely revised and updated version of a classic guide to the best design, construction, and equipment to use when setting up a darkroom. This book features ideas and money-saving tips on how to put a darkroom almost anywhere in your home or apartment. It takes you inside darkrooms of photographers around the world including those of famous photographers such as, Harry Callahan, Aaron Siskind, Berenice Abbott, and W. Eugene Smith. In addition, it contains detailed do-it-yourself plans for the most essential darkroom components, cutouts and design grids to plan that "dream" darkroom, and special sections on the color darkroom and the digital darkroom. The most comprehensive book on the darkroom. A step-by-step guide to help anyone plan and build a photo lab. Illustrated with an abundance of photos and sketches.

The Darkroom of Damocles $15.43 A modern day masterpiece and the most critically acclaimed Dutch novel of the 20th centuryafinally available in English and shortlisted by Three Percent as one of the best translated books of 2008 During the German occupation of Holland, tobacconist Henri Osewoudt is visited by a man named Dorbeck, who strangely proves to be Osewoudtas spitting image in reverse. Dorbeck assigns Osewoudt to commit a series of dangerous assignments, but things quickly go awry, with Osewouldt eventually killing his own wife. After the war, Osewoudt is taken for a traitor and captured. Osewoudt cannot prove that he received assignments from Dorbeckahe cannot even prove that his doppelganger ever existed. As it forces readers to confront questions of morality and power, right and wrong, "The Darkroom of Damocles" builds to a stunning conclusion.

In and Out Trays $24.99 H. Armstrong Roberts In and Out Trays - Photographic Print

Darkroom (DVD) $36.49 A married couple that develops crime scene photos for the Salt Lake Police Department gradually finds the psychic toll of their job becoming too much to bear as the disturbing content of the pictures begins to weigh heavily on their morale and cast a suffocating blanket of melancholy over their very existence. Every day, David and Coy are reminded just how badly life can end. When David suffers a devastating disconnect from reality and Coy experiences serious complications while attempting to get pregnant, both of their lives begin spiraling down the same dark and dangerous path.

Darkroom (Hardcover) $128.93 Description not available.