Barry Idmess Darkroom Equipment

Flash Trigger Receiver

How More Women Can Survive The Hot Flash

A hot flash is not something that can easily be seen by an onlooker; you almost have to be the one under attack. A hot flash can be described as having an intense fever or the feeling you get after standing too long near a blazing fire. It's an intense uncontrollable heat within a woman's body that may last a few seconds or up to an hour. Some women have reported having a hot flash as often as every 90 minutes!

Hot flashes are described as sudden waves of heat that primarily affects the head and neck region when blood vessels near the surface of the skin dilate. Some women can predict when they are going to have a hot flash or even the duration and frequency.

During a hot flash, the heart rate increases. The woman begins to react to the heat by perspiring usually on the upper lip or forehead, and some women fan themselves with their hand, a fan, magazine or whatever is available to generate cool air.

Following a hot flash, flushing or redness occurs underneath the skin and for many the body temperature drops as women experience a chill as the body struggles to regain its normal temperature. Some women also experience nighttime hot flashes or night sweats.

Some of the most unpleasant symptoms of menopause, such as hot flashes and night sweats, have long been believed to originate in the ovaries. This theory is popular because women experience relief from hot flashes once they replace their lost estrogen.

The most recent theory indicates hot flashes start in the brain because the hypothalamus and the pituitary gland stop reacting normally to estrogen. This occurs because estrogen production affects the part of the brain that controls the body's temperature. The theory deduces that the drop in estrogen confuses the hypothalamus which is referred to as the body's thermostat and results in making the body too hot.

Hot flashes can be triggered by spicy food, dairy products, meat products, hot drinks, alcohol, sugar, smoking, caffeine, diet pills, stress, hot weather, hot showers, hot beds, hot rooms, hot tubs, saunas, tobacco, marijuana, anxiety, stress and anger. Women should avoid fried, rich, spicy and sugary foods because they can develop heartburn, acid reflux, and gallstones. Hot flashes are more common in the evening and during hot weather with the most common times identified for hot flashes between six and eight in the morning and six to ten at night.

If you can identify what triggers your hot flashes, that is a good indication of survival during an attack. It is also advisable to keep a record of when your hot flashes happen and what you were eating or doing, or how you were feeling at the time in order to be able to predict when and how the may occur.

The best way to beat a hot flash is naturally. The medical profession has generally ignored natural, less risky remedies for hot flashes to Hormone Replacement Therapy (HRT). Recent studies have shown that medication is not always helpful. However, you should always begin with the least aggressive approach to treating menopausal symptoms which would be natural remedies.

There are some natural remedies that provide relief for menopausal symptoms, such as isoflavones found in soybeans. Isoflavones is similar to the hormone estrogen and when ingested, stimulates estrogen production. Although study results are not entirely consistent, isoflavones from soy and red clover have been found to be helpful for symptoms of menopause.

Bioflavonoids are chemicals found in citrus fruits that have been shown to protect capillaries and other small blood vessels. Bioflavonoids, when taken with Vitamin C, have been found to strengthen and stabilize the capillaries and other small blood vessels which can prevent hot flashes from occurring. The effect on hot flashes may be due to the similarity between certain bioflavonoids and our bodies own estrogens.

Vitamin E supplementation has also been shown to significantly reduce hot flashes. Clinical trials reported that vitamin E controlled flushing in more than 50% of the cases. It is thought that vitamin E may act as an estrogen substitute, thereby reducing the intensity of hot flashes.

Some other herbal supplements that have shown to reduce hot flashes and other symptoms of menopause are: bioflavonoid supplements, evening primrose oil (also used for PMS symptoms), ginseng, black cohosh, chickweed tincture, vitex agnus castii, blue cohosh, dong quai, wild yam root, natural progesterone, licorice root, false unicorn, lachesis, pulsatilla and sarsaparilla. Additionally, other alternative remedies that women can benefit from for relief of hot flashes are sage tea, acupuncture, meditation and biofeedback.

Functional health beverages containing certain fruit or vegetables with the nutrients polyphenols, flavenols and phytosterols also contain estrogen like chemicals that can reduce menopause symptoms.

Testimonials received from functional health beverage users state positive results from menopausal and PMS symptoms when consuming functional health beverages.

Medical Disclaimer
It is important when using herbs and vitamins to pay attention to our bodies' responses and to remember that natural doesn't mean we can take large amounts of a substance without thinking of side effects. It is recommended to obtain advice from someone who is familiar with herbs and vitamins for the correct dosages.

Information in this article is for informational purposes only. It is not intended to act as a substitute for medical advice provided by a qualified health care provider, nor is any information on this topic intended to diagnose, treat, care or prevent any diseases. Statements have not been evaluated by the food and drug administration.

About the Author

Janice Willingham is an Internet marketer who likes travel and dabbling in health and wellness products. To find out more information go to:
YourHealthMatters

DSLRKIT Flash Trigger Receiver PT-04NE Umbrella Holder $12 DSLRKIT PT-04NE 4 channels FM Receiver for Wireless Flash Trigger Studiothe item is with an umbrella holder,therefore there is no necessory to use a light stand bracket, and the flash effectiveness is the same as the item that is used with a light stand bracket.Notice:The item must use with the "Transmitter" togetherthe transmitter of DSLRKIT brand can trigger all the reciever as long as it is DSLRKIT brand,eg. 4 Channel Transmitter can trigger the reciever from DC-01A, AC-01A, DC-02A, AC-02A, DC-04A, AC-04A, PT-04A, DC-16A, AC-16A;eg. 4 Channel Transmitter can trigger 16 Channel Receiver,but only work on 4 channels from the receiver(you have to find from the 16 Channel of the Receiver to see which 4 channels is work on).IntroductionThe brand is called DSLRKIT.The remote trigger for studio flashes and outdoor flash is used as the controller of synchronous trigger studio flash of cameras. It consists of a signal sender and a receiver trigger and works by means of the frequency modulation wireless remote control.The signal transmitter adopts the advanced circuit and components, and can transmit the coded FM wireless signa. The circuit of the transmitter has the function of standby and hibernation, thus it has low power consumption; the products can work under the standby mode for more than one year with only one battery; continuously trigger for thirty thousand times. the trigger current is only 0.01MA, which will definitely cause no damage to the flash contact of the camera. The transmitter is applicable to the traditional or digital camera with hot shoe or PC controlling interface.Receiver trigger adopts dry battery for power supply, which is safe, energy-saving, and convenient. The product adopts micro-computer for controlling the decoding, Which has superior anti-interference capability; sensitive reaction speed, the highest synchronous speed can reach 1/500 sec.All the models of the product uniquely have the multi-frequency isolation technique and the self coding matching function by users. Users can freely match and use the sender and the receiver according to the demands, which have four isolated channels to suit for specific shooting environments. Triggers set in different channels can be combined to work or independently work but do not interfere with each other in an efficient distance.Transmitter Receiver Power Source: 23A AC 100-230V Outdoor operating distance (open area): >30MIndoor operating distance: >10MFrequency Channel: 4Operating Frequency: 433MhzOutdoor Synchronous Speed (open area): Max 1/500secIndoor Synchronous Speed: Max 1/250secHow to use: Make sure the channel selector of both transmitter and receiver at same position Insert the receiver's trigger output plug into your flash's jack Press the test button on your transmitter. The studio light should now flash Insert the transmitter's hot shoe socket into your camera's hot shoe jack (if your camera does not have a hot shoe use a PC sync cord and insert into th

Nice AC-04 4 channel Wireless Studio Flash Trigger+Receiver $18.11 - The remote trigger for studio flashes and outdoor flash is used as the controller of synchronous trigger studio flash of cameras- It consisits of a signal sender and a receiver trigger and works by means of the frequency modulation wireless remote control- Outdoor operating distance: 30M- Indoor operating distance: 10m

DSLRKIT 4 channel Receiver PT-04 for Flash Trigger $11 DSLRKIT PT-04A 4 channels FM Receiver for Wireless Flash Trigger StudioNotice:The item must use with the "Transmitter" togetherthe transmitter of DSLRKIT brand can trigger all the reciever as long as it is DSLRKIT brand,eg. 4 Channel Transmitter can trigger the reciever from DC-01A, AC-01A, DC-02A, AC-02A, DC-04A, AC-04A, PT-04A, DC-16A, AC-16A;eg. 4 Channel Transmitter can trigger 16 Channel Receiver,but only work on 4 channels from the receiver(you have to find from the 16 Channel of the Receiver to see which 4 channels is work on). IntroductionThe brand is called DSLRKIT.The remote trigger for studio flashes and outdoor flash is used as the controller of synchronous trigger studio flash of cameras. It consists of a signal sender and a receiver trigger and works by means of the frequency modulation wireless remote control.The signal transmitter adopts the advanced circuit and components, and can transmit the coded FM wireless signa. The circuit of the transmitter has the function of standby and hibernation, thus it has low power consumption; the products can work under the standby mode for more than one year with only one battery; continuously trigger for thirty thousand times. the trigger current is only 0.01MA, which will definitely cause no damage to the flash contact of the camera. The transmitter is applicable to the traditional or digital camera with hot shoe or PC controlling interface.Receiver trigger adopts dry battery for power supply, which is safe, energy-saving, and convenient. The product adopts micro-computer for controlling the decoding, Which has superior anti-interference capability; sensitive reaction speed, the highest synchronous speed can reach 1/500 sec.All the models of the product uniquely have the multi-frequency isolation technique and the self coding matching function by users. Users can freely match and use the sender and the receiver according to the demands, which have four isolated channels to suit for specific shooting environments. Triggers set in different channels can be combined to work or independently work but do not interfere with each other in an efficient distance.TransmitterReceiver Power Source: 23A AC 100-230V Outdoor operating distance (open area): >30MIndoor operating distance: >10MFrequency Channel: 4Operating Frequency: 433MhzOutdoor Synchronous Speed (open area): Max 1/500secIndoor Synchronous Speed: Max 1/250secHow to use: Make sure the channel selector of both transmitter and receiver at same position Insert your flash hot shoe socket into the receiver's hot shoe jack Press the test button on your transmitter. The Flash should now flash Insert the transmitter's hot shoe socket into your camera's hot shoe jack (if your camera does not have a hot shoe use a PC sync cord and insert into the socket) You should now be ready to start shootingSuitable ForCanon SpeedLite 580EX II, 580EX, 550EX, 540EZ, 520EZ,430EX/EXII, 430EZ, 420EX, 420EZ, 380EX;Nikon SpeedLight SB-900, SB-800, SB-600,

PE-16NE 3-in-1 Wireless Remote Flash Trigger Single Receiver with Umbrella Holder $18.95 - Use global free-change frequency 2.4GHz,? and 16 selectable channels. - Maximum sync speed comes to 1/200s - Receiver with umbrella holder - Trigger the flash light through hot-shoe,? and trigger the studio light through Receiver to 6.35mm Jack Sync Cable or? Receiver to 3.50mm Jack Sync Cable. - Supports multiple outdoor flash light and studio lights. - Maximum operating distance comes to 100 meters. - Receiver battery: 2*AAA batteries (not included) - Functions:Trigger speedlite/Trigger Studio strobe/Play as remote shutter release/Control several flashes - Single receiver only ? ?

Nice AC-04 Universal Wired Studio Flash Trigger Receiver $11.06 - The wired trigger receiver for studio flashes is used as the controller of synchronous trigger studio flash of cameras- The signal transmitter adopts the advanced circuit and components- It has low power consumption, superior anti-interference capability- High sensitivity, and easy to use

Nice DC-04 Universal 4 Channel Wired Studio Flash Trigger Receiver $9.48 - The wired trigger receiver for studio flashes is used as the controller of synchronous trigger studio flash of cameras- The signal transmitter adopts the advanced circuit and components- It has low power consumption, superior anti-interference capability- High sensitivity, and easy to use

CTR-301P Flash Sync Trigger Remote Control (Receiver Only) $16.9 Note: This listing is for the receiver only. If you want to purchase the complete set, please visit here:http://www.bestofferbuy.com/ctr301p-flash-sync-trigger-remote-control-p-28113.htmlModel: CTR-301PUse the transmitter and receiver to control the flashlight (radio frequency control) Also you can use only the receiver to control the flashlight (triggered by light within 10 meters)Trigger the vedio flash after connect the PC Sync portDistance >= 30m1x23A + 1xCR2 included2.5mm PC sync cable includedWeight: 4.23 oz/120 g

16 Channel Wireless Hot Shoe Flash Remote Trigger Receiver for Canon Sony Nikon Olympus Camera $19.99 16 Channel Wireless Hot Shoe Flash Remote Trigger Receiver for Canon Sony Nikon Olympus Camera

4 Channel Wireless Hot Shoe Flash Remote Trigger Receiver for Canon Sony Nikon Olympus Camera $18.99 4 Channel Wireless Hot Shoe Flash Remote Trigger Receiver for Canon Sony Nikon Olympus Camera

DSLRKIT 4 channel Studio Flash Trigger Receiver AC-04 $9 DSLRKIT AC-04B 4 channels FM Receiver for Wireless Flash Trigger StudioNotice: The item must use with the "Transmitter" togetherthe transmitter of DSLRKIT brand can trigger all the reciever as long as it is DSLRKIT brand,eg. 4 Channel Transmitter can trigger the reciever from DC-01A, AC-01A, DC-02A, AC-02A, DC-04A, AC-04A, PT-04A, DC-16A, AC-16A;eg. 4 Channel Transmitter can trigger 16 Channel Receiver,but only work on 4 channels from the receiver(you have to find from the 16 Channel of the Receiver to see which 4 channels is work on). IntroductionThe brand is called DSLRKIT.The remote trigger for studio flashes and outdoor flash is used as the controller of synchronous trigger studio flash of cameras. It consists of a signal sender and a receiver trigger and works by means of the frequency modulation wireless remote control.The signal transmitter adopts the advanced circuit and components, and can transmit the coded FM wireless signa. The circuit of the transmitter has the function of standby and hibernation, thus it has low power consumption; the products can work under the standby mode for more than one year with only one battery; continuously trigger for thirty thousand times. the trigger current is only 0.01MA, which will definitely cause no damage to the flash contact of the camera. The transmitter is applicable to the traditional or digital camera with hot shoe or PC controlling interface.Receiver trigger adopts dry battery for power supply, which is safe, energy-saving, and convenient. The product adopts micro-computer for controlling the decoding, Which has superior anti-interference capability; sensitive reaction speed, the highest synchronous speed can reach 1/500 sec.Transmitter ReceiverPower Source:23AAC 100-230VOutdoor operating distance (open area): >30MIndoor operating distance: >10MFrequency Channel:4Operating Frequency: 433MhzOutdoor Synchronous Speed (open area): Max 1/500secIndoor Synchronous Speed: Max 1/250secHow to use: Make sure the channel selector of both transmitter and receiver at same position Insert the receiver's trigger output plug into your flash's jack Press the test button on your transmitter. The studio light should now flash Insert the transmitter's hot shoe socket into your camera's hot shoe jack(if your camera does not have a hot shoe use a PC sync cord and insert into the socket) You should now be ready to start shootingWeight: 107 g

DSLRKIT 4 channel Studio Flash Trigger Receiver DC-04 $8 DSLRKIT DC-04A 4 channels FM Receiver for Wireless Flash Trigger StudioNotice:The item must use with the "Transmitter" togetherthe transmitter of DSLRKIT brand can trigger all the reciever as long as it is DSLRKIT brand,eg. 4 Channel Transmitter can trigger the reciever from DC-01A, AC-01A, DC-02A, AC-02A, DC-04A, AC-04A, PT-04A, DC-16A, AC-16A;eg. 4 Channel Transmitter can trigger 16 Channel Receiver,but only work on 4 channels from the receiver(you have to find from the 16 Channel of the Receiver to see which 4 channels is work on).IntroductionThe brand is called DSLRKIT.The remote trigger for studio flashes and outdoor flash is used as the controller of synchronous trigger studio flash of cameras. It consists of a signal sender and a receiver trigger and works by means of the frequency modulation wireless remote control.The signal transmitter adopts the advanced circuit and components, and can transmit the coded FM wireless signa. The circuit of the transmitter has the function of standby and hibernation, thus it has low power consumption; the products can work under the standby mode for more than one year with only one battery; continuously trigger for thirty thousand times. the trigger current is only 0.01MA, which will definitely cause no damage to the flash contact of the camera. The transmitter is applicable to the traditional or digital camera with hot shoe or PC controlling interface.Receiver trigger adopts dry battery for power supply, which is safe, energy-saving, and convenient. The product adopts micro-computer for controlling the decoding, Which has superior anti-interference capability; sensitive reaction speed, the highest synchronous speed can reach 1/500 sec.TransmitterReceiverPower Source:23A AC 100-230V Outdoor operating distance (open area): >30MIndoor operating distance: >10MFrequency Channel: 4Operating Frequency: 433MhzOutdoor Synchronous Speed (open area): Max 1/500secIndoor Synchronous Speed: Max 1/250secTransmitter not includethe transmitter of DSLRKIT brand can trigger all the reciever as long as it is DSLRKIT brand,eg. 4 Channel Transmitter can trigger the reciever from DC-01A, AC-01A, DC-02A, AC-02A, DC-04A, AC-04A, PT-04A, DC-16A, AC-16A; 16 Channel Transmitter can trigger the reciever from DC-01A, AC-01A, DC-02A, AC-02A, DC-04A, AC-04A, PT-04A, DC-16A, AC-16A;eg. 4 Channel Transmitter can trigger 16 Channel Receiver,but only work on 4 channels from the receiver(you have to find from the 16 Channel of the Receiver to see which 4 channels is work on).eg. 16 Channel Transmitter can trigger 4 Channel Receiver,but only work on 4 channels from the transmitter(you have to find from the 16 Channel of the Transmitter to see which 4 channels is work on).eg. 4 Channel Transmitter can trigger 1 Channel Receiver,but only work on 4 channels from the receiver(you have to find from the 1 Channel of the Transmitter to see which 4 channels is work on).eg. 1 Channel Transmitter can trigger 4 Channel Receiver,but only

RF-16NE Wireless Remote Flash Trigger Receiver for NIKON $33.33 - World wide free 2.4GHz frequency - FSK system with 16 selectable channels - Operating distance up to 100M - Flash sync speed up to 1/250sec - Shutter remote control function(need extra shutter connecting cord) - With wake up funcion for TTL flash gun - Wigh umbrella holder - Powered by AAA type battery included

RF-16NE Wireless Remote Flash Trigger Receiver for Canon $33.39 - World wide free 2.4GHz frequency - FSK system with 16 selectable channels - Operating distance up to 100M - Flash sync speed up to 1/250sec - Shutter remote control function(need extra shutter connecting cord) - With wake up funcion for TTL flash gun - Wigh umbrella holder - Powered by AAA type battery included

KING Wireless TTL Flash Trigger Transmitter Receiver for Sony (2*AA) $97.4 Color: BlackFSK 2.4GHz Wireless System, up to 100 meters operating rangeSupports up to 7 wireless channelsUp to 1/8000s sync speedSupports ADL-TTL / TTL / M flash modesUp to 3 difference group and 7 combination on the flash transceiverCompatible Flash: Mechanical flash, studio light and outdoor lightSupports exposure compensation, ae lock, former shade synchronization, after shade synchronization, manual transmitter group flash setSupports high speed sync for studio and outdoor light, well known brand flashes for high speed sync and TTL (METZ / Sigma / Sunpak / Nissin), Well known brand flashes for trigger(does not support high speed sync and TTL flash), firmware upgrade, multi receiver control, flash focusing lightSupports TTL modes/hot shoes/cable interface triggeredInterface: USB, PC cable outlet, hot shoesPowered by 2*AA batteries (not included)Compatible Camera: Sony a550/a580/a350/a500/a700/ka55/a390/a850/a900 etc.Weight: 59gDimension: 88*56*32mmPackage Includes:1 * Transmitter1 * Hot shoe holder1 * BL-3.5mm connection cable (155cm)1 * BL-1/2 connection cable (153cm)1 * English manual1 * Carrying pouch

Studio Flash Trigger 3.5mm PC to Dual Hot shoe Adapter $5.41 - 3.5mm PC SYNC to Dual Hot Adapter Adapter- Only using 1 x Trigger Receiver to control 2 x Flash Speedlite at the same time

Nice PT-04S1 Wireless Flash Trigger+Receiver for Sony $20.62 - Operates on radio frequency 433MHz- Four channels capability- Shutter speed 1/250s- Transmitter includes 23A,12V battery

4 Channel FM Wireless Studio Flash Trigger PT-04 with Umbrella Holder $19.59 - The remote trigger for studio flash and outdoor flash is used as the controller of synchronous trigger studio flash of cameras- The highest synchronous speed can reach 1/250 sec- Power source: transmitter: 1 X 23A battery ????????????? receiver: 2 x AAA battery

Kenro Flash Receiver (Only for FERF 608D). $33.99 This inexpensive trigger and receiver range from Kenro offers affordable off-camera flash.The Kenro Flash receiver is for use with the wireless transmitter kit only.Please ensure you select the correct model for the transmitter model you wish to use this receiver with, as the models are not interchangeable.Only for FERF 608D.Gross weight - 0.1kg.EAN/Barcode 5023168028643.Free delivery by post.

Nice PT-04NE Universal 4 Channel FM Radio Wireless Flash Trigger Receiver $12.5 - The remote trigger for studio flashes and outdoor flash is used as the controller of synchronous trigger studio flash of cameras- The signal transmitter adopts the advanced circuit and components- It has low power consumption, superior anti-interference capability- High sensitivity, and easy to use

Nice PT-04GY Universal 4 Channel FM Radio Wireless Flash Trigger Receiver $10.98 - The remote trigger for studio flashes and outdoor flash is used as the controller of synchronous trigger studio flash of cameras- The signal transmitter adopts the advanced circuit and components- It has low power consumption, superior anti-interference capability- High sensitivity, and easy to use

CTR-301P Flash Sync Trigger Remote Control $23 - Model: CTR-301P- Use the transmitter and receiver to control the flashlight (radio frequency control)- Also you can use only the receiver to control the flashlight (triggered by light within 10 meters)- Trigger the vedio flash after connect the PC Sync port- Distance >= 30m- 1x23A + 1xCR2 included- 2.5mm PC sync cable includedSpecificationsDimensions: 0 in x 0 in x 0 inWeight: 4.23 oz

PR-02A Wireless Flash Radio Remote Trigger with Umbrella Holder $26.34 - Working frequency: 433MHz - Maximum sync speed comes to 1/500s - Receiver with umbrella holder - Supports multiple outdoor flash light and studio lights. - Maximum operating distance comes to?30 meters. - Receiver battery: AAA batteries (not included) - Transmitter battery: 23A-12V battery - Functions:Trigger speedlite/Trigger Studio strobe/Play as remote shutter release/Control several flashes - Package?included 1 x receiver 1 x transmitter 1 x cable 1 x user manual? ? ?

PE-16NE 3-in-1 Wireless Remote Flash Trigger Set with Umbrella Holder $30.63 - Use global free-change frequency 2.4GHz,? and 16 selectable channels. - Maximum sync speed comes to 1/200s - Receiver with umbrella holder - Trigger the flash light through hot-shoe,? and trigger the studio light through Receiver to 6.35mm Jack Sync Cable or? Receiver to 3.50mm Jack Sync Cable. - Supports multiple outdoor flash light and studio lights. - Maximum operating distance comes to 100 meters. - Receiver battery: 2*AAA batteries (not included) - Transmitter battery: 1*23A 12V battery (included) - Functions:Trigger speedlite/Trigger Studio strobe/Play as remote shutter release/Control several flashes - Package included 1 x Transmitter 1 x Receiver 1 x Receiver to 6.35mm Jack Sync Cable (for Studio Light/Strobes) 1 x Receiver to 3.50mm Jack Sync Cable (for Studio Light/Strobes) 1 x 2.50mm Jack to PC Sync Cable (Transmitter to Camera) 1 x Trigger safety seat 1 x Transmitter 23A 12V Batteries 1 x PE-16NE User Manual ?

PE-16NE Wireless Flash Trigger Receiver for CANON Nikon D-SLR Umbrella Holder $19.9 Notice: This product works together with a transmitter.This flash remote trigger can work as flashgun trigger, studio light trigger, and works with extra shutter remote cord. This can be used as wireless remote shutter release to support half-press focusing and full-press to take pictures. The flash sync speed is up to 1/250s and the shutter control mode includes single, continuous BULB and 4sec delay shooting.Transmitter has a PE input socket which connects with your camera's PC sync port. In this case, you can keep on using your hot shoe and trigger the other flashes. Its receiver has a PE output socket, which can be used to connect to camera's shutter remote port (needs extra shutter connect cable) or the studio flash via attached PE to 3.5mm sync cord, flash via PC sync cord (needs extra 3.5mm to PC sync cable).It also has an umbrella holder so there is no need to use a light stand bracket. The flash works the same as the item that is used with a light stand bracket. This product uses global free channel 2.4GHz and FSK modulation system to make the performance more stable, and work in longer distance. It has power saving features that can make the transmitter and receiver battery last longer.Features:Uses global free 2.4GHz channel and FSK modulation system, and there is 16 selectable frequency channels.Flash sync speed is up to 1/250s.Supports the TTL flashgun wake-up function; you'll never miss any shot opportunity.Fires the flashgun through hot shoe part and fire the studio light through PE to 3.5mm cable (you can change 3.5mm to 6.35mm via attached convert adapter).Supports to control multiple flashguns and studio lights at same time.Shutter function mode, included single, continuous, bulb and 4sec delay shooting.Supports to control multiple cameras to take shots at the same time.Operating distance is more than 100 meters (outdoor without obstacle: approximately 200 meter distance maximum).Ultra-low standby power consumption; transmitter standby time is more than 2 years, and receiver standby time up to 300 hours.Low voltage design, it's able to use rechargeable batteries.With umbrella holderFunctions :Type: Using FSK 2.4GHz Wireless Remote Control SystemOperation Range:100 metersChannel:16Shutter release: Half-press, Full-pressTransmitter stand-by time: 2 years or >10000 Timer (2x AAA alkaline cell)Receiver stand-by time: 45 Hours(2x AAA alkaline cell)Dimensions ( W x L x H): Transmitter: 76mm x 36 mm x 35mmReceiver: 76mm x 61 mm x 38.7 mmWeight: Transmitter: 50 g (with battery)Receiver: 60 g (with battery)Wireless flash trigger mode: Transmitter compatible with the device under flash trigger modeCompatible device:PE-16NETXfor CanonCanon EOS: 1D series, 5D series, 7D,60D, 50D, 40D. 30D, 20D, 10D,600D,550D, 500D, 450D, 400D, 350D,1100D, 1000DRebel T3i, T3, T2i,T1i,XSi,XS,Xti,Xt,Powershot G10, G11, G12.PE-16NETXfor NikonNikon: D7000, D5000, D5100, D3100, D3000,D3, D700, D2 series, D300 series, D200,D90, D80s D70 series, D60, D5

DSLRKIT RF-16NE Flash Trigger for CANON Umbrella holder $35.8 DSLRKIT RF-16NE Wireless Remote Flash Trigger for CanonThis flash remote trigger can work as flashgun trigger, studio light trigger, and work with extra shutter remote cord, it can remote control the camera, just like the wireless remote shutter release, support half-press focusing and full-press take the picture.The flash sync speed is up to 1/250s.The shutter control mode included single, continuous, BULB and 4sec delay shooting.Transmitter has a 3.5mm input socket witch can connect with your cameras PC sync port. in this case, you can keep on use your hot shoe and trigger the other flashes.Receiver has a 3.5mm output socket.It can be use to connect your cameras shutter remote port(Need extra shutter connect cable), or connect the studio flash via attached 3.5mm to 3.5mm sync cord, or connect with the flash via PC sync cord (need to purchase extra 3.5mm to PC sync cable).And as you can see, in addition to those function, it also have an umbrella holder.So there is no need to use a light stand bracket, and the flash effectiveness is the same as the item that is used with a light stand bracket.RF-16NE is using global free channel 2.4GHz and FSK modulation system to make the performance more stable, and work in bigger distance.Particular saving power design can make the transmitter and receiver battery last more time.Features:Using global free 2.4GHz channel and FSK modulation system, and there's 16 selectable frequency channels.Flash sync speed is up to 1/250s.Support the TTL flashgun wake-up function; you'll never miss any shot opportunity.Fire the flashgun through hot shoe part and fire the studio light through 3.5mm to 3.5mm cable. (you can change 3.5mm to 6.35mm via attached convert adapterSupports to control multiple flashguns and studio lights at same time.Shutter function mode, included single, continuous, bulb and 4sec delay shooting.Supports to control multiple cameras to take shots at the same time.Operating distance is more than 100 meters. (outdoor without obstacle, we tested the max distance is 200 meters)Ultra-low standby power consumption; transmitter standby time is more than 2 years, and receiver standby time up to 300 hours.Low voltage design, it's able to use rechargeable batteries.Power supply use 2*AAA batteries.(transmitter and receiver)With umbrella holderFunctions Type:Using FSK 2.4GHz Wireless Remote Control SystemOperation Range:100 metersChannel:16Shutter releaseHalf-perss, Full-pressTransmitter stand-by time:2 years or >10000 Timer (2x AAA alkaline cell)Receiver stand-by time:45 Hours(2x AAA alkaline cell)Dimensions ( W x L x H):Transmitter,76mm x 36 mm x 35mm;Receiver,76mm x 61 mm x 38.7 mmTransmitter compatible with the device under flash trigger mode:ModelCompatible deviceRF-16NETXfor CanonCanon EOS: 1D series, 5D series, 7D,60D, 50D, 40D. 30D, 20D, 10D,600D,550D, 500D, 450D, 400D, 350D,1100D, 1000D Rebel T3i, T3, T2i,T1i,XSi,XS,Xti,Xt,Powershot G10, G11, G12.RF-16NETX for Nikon Nikon: D7000, D5000, D5100, D3100,

DSLRKIT RF-16NE Flash Trigger for NIKON Umbrella holder $35.8 DSLRKIT RF-16NE Wireless Remote Flash Trigger for NikonThis flash remote trigger can work as flashgun trigger, studio light trigger, and work with extra shutter remote cord, it can remote control the camera, just like the wireless remote shutter release, support half-press focusing and full-press take the picture.The flash sync speed is up to 1/250s. The shutter control mode included single, continuous, BULB and 4sec delay shooting.Transmitter has a 3.5mm input socket witch can connect with your cameras PC sync port. in this case, you can keep on use your hot shoe and trigger the other flashes.Receiver has a 3.5mm output socket.It can be use to connect your cameras shutter remote port(Need extra shutter connect cable), or connect the studio flash via attached 3.5mm to 3.5mm sync cord, or connect with the flash via PC sync cord (need to purchase extra 3.5mm to PC sync cable).And as you can see, in addition to those function, it also have an umbrella holder. So there is no need to use a light stand bracket, and the flash effectiveness is the same as the item that is used with a light stand bracket.RF-16NE is using global free channel 2.4GHz and FSK modulation system to make the performance more stable, and work in bigger distance. Particular saving power design can make the transmitter and receiver battery last more time.Using global free 2.4GHz channel and FSK modulation system, and there's 16 selectable frequency channels.Flash sync speed is up to 1/250s.Support the TTL flashgun wake-up function; you'll never miss any shot opportunity.Fire the flashgun through hot shoe part and fire the studio light through 3.5mm to 3.5mm cable. (you can change 3.5mm to 6.35mm via attached convert adapter)Supports to control multiple flashguns and studio lights at same time.Shutter function mode, included single, continuous, bulb and 4sec delay shooting.Supports to control multiple cameras to take shots at the same time.Operating distance is more than 100 meters. (outdoor without obstacle, we tested the max distance is 200 meters)Ultra-low standby power consumption; transmitter standby time is more than 2 years, and receiver standby time up to 300 hours.Low voltage design, it's able to use rechargeable batteries.Power supply use 2*AAA batteries.(transmitter and receiver)With umbrella holderFunctionsType:Using FSK 2.4GHz Wireless Remote Control SystemOperation Range:100 metersChannel:16Shutter releaseHalf-perss, Full-pressTransmitter stand-by time:2 years or >10000 Timer (2x AAA alkaline cell);Receiver stand-by time:45 Hours(2x AAA alkaline cell)Transmitter compatible with the device under flash trigger mode:Model Compatible deviceRF-16 NETX for CanonCanon EOS: 1D series, 5D series, 7D, 60D, 50D, 40D. 30D, 20D, 10D,600D,550D, 500D, 450D, 400D, 350D,1100D, 1000D Rebel T3i, T3, T2i,T1i,XSi,XS,Xti,Xt,Powershot G10, G11, G12.RF-16 NETXfor Nikon Nikon: D7000, D5000, D5100, D3100, D3000,D3, D700, D2 series, D300 series, D200,D90, D80s D70 series, D60, D50, D40 series

Nice PT-04NE Hot Shoe Studio Strobe Flash Trigger Umbrella Holder $38.19 Overview:Nice PT-04NE 4 channels Wireless Flash Trigger SET for Studio Strobe Flash and Hot Shoe Flashthe item is with an umbrella holder,therefore there is no necessory to use a light stand bracket, and the flash effectiveness is the same as the item that is used with a light stand bracket.the transmitter of Nice brand can trigger all the reciever as long as it is Nice brand,eg. 4 Channel Transmitter can trigger the reciever from DC-01A, AC-01A, DC-02A, AC-02A, DC-04A, AC-04A, PT-04, DC-16A, AC-16A;eg. 4 Channel Transmitter can trigger 16 Channel Receiver,but only work on 4 channels from the receiver(you have to find from the 16 Channel of the Receiver to see which 4 channels is work on).IntroductionThe brand is called Nice.The remote trigger for studio flashes and outdoor flash is used as the controller of synchronous trigger studio flash of cameras. It consists of a signal sender and a receiver trigger and works by means of the frequency modulation wireless remote control.The signal transmitter adopts the advanced circuit and components, and can transmit the coded FM wireless signa. The circuit of the transmitter has the function of standby and hibernation, thus it has low power consumption; the products can work under the standby mode for more than one year with only one battery; continuously trigger for thirty thousand times. the trigger current is only 0.01MA, which will definitely cause no damage to the flash contact of the camera. The transmitter is applicable to the traditional or digital camera with hot shoe or PC controlling interface.Receiver trigger adopts dry battery for power supply, which is safe, energy-saving, and convenient. The product adopts micro-computer for controlling the decoding, Which has superior anti-interference capability; sensitive reaction speed, the highest synchronous speed can reach 1/500 sec.All the models of the product uniquely have the multi-frequency isolation technique and the self coding matching function by users. Users can freely match and use the sender and the receiver according to the demands, which have four isolated channels to suit for specific shooting environments. Triggers set in different channels can be combined to work or independently work but do not interfere with each other in an efficient distance.Technique Parameter: Transmitter Receiver Power Source 23A AC 100-230V Outdoor operating distance (open area) gt;30M Indoor operating distance gt;10M Frequency Channel 4 Operating Frequency 433Mhz Outdoor Synchronous Speed (open area) Max 1/500sec Indoor Synchronous Speed Max 1/250secHow to use:• Make sure the channel selector of both transmitter and receiver at same position• Insert the receiver's trigger output plug into

Nice PT-04GY Universal 4 Channel FM Radio Wireless Flash Trigger Set $17.49 - The remote trigger for studio flash and outdoor flash is used as the controller of synchronous trigger studio flash of cameras- Frequency: 433? MHZ- Channels: 4 channels- Sync speed: 1/250s- Strobe and speedlite< 30 m- Transmitter: 23A 12V- Receiver: 2*1.5V AAA

Nice PT-04NE Universal 4 Channel FM Radio Wireless Flash Trigger Set $18.99 - The remote trigger for studio flash and outdoor flash is used as the controller of synchronous trigger studio flash of cameras- Frequency: 433? MHZ- Channels: 4 channels- Sync speed: 1/250s- Strobe and speedlite< 30 m- Transmitter: 23A 12V- Receiver: 2*1.5V AAA

DSLRKIT 4 Channel Wireless Studio Flash Trigger DC-04 $13 DSLRKIT DC-04A 4 channels FM (Transmitter + Receiver) Set Wireless Flash Trigger for Studiothe transmitter of DSLRKIT brand can trigger all the reciever as long as it is DSLRKIT brand,eg. 4 Channel Transmitter can trigger the reciever from DC-01A, AC-01A, DC-02A, AC-02A, DC-04A, AC-04A, PT-04A, DC-16A, AC-16A;eg. 4 Channel Transmitter can trigger 16 Channel Receiver,but only work on 4 channels from the receiver(you have to find from the 16 Channel of the Receiver to see which 4 channels is work on). Introduction：The brand is called DSLRKIT.The remote trigger for studio flashes and outdoor flash is used as the controller of synchronous trigger studio flash of cameras. It consists of a signal sender and a receiver trigger and works by means of the frequency modulation wireless remote control.The signal transmitter adopts the advanced circuit and components, and can transmit the coded FM wireless signa. The circuit of the transmitter has the function of standby and hibernation, thus it has low power consumption; the products can work under the standby mode for more than one year with only one battery; continuously trigger for thirty thousand times. the trigger current is only 0.01MA, which will definitely cause no damage to the flash contact of the camera. The transmitter is applicable to the traditional or digital camera with hot shoe or PC controlling interface.Receiver trigger adopts dry battery for power supply, which is safe, energy-saving, and convenient. The product adopts micro-computer for controlling the decoding, Which has superior anti-interference capability; sensitive reaction speed, the highest synchronous speed can reach 1/500 sec.Transmitter Receiver Power Source: 12V 23AAAA x2Outdoor operating distance (open area): >30MIndoor operating distance: >10MFrequency Channel: 4Operating Frequency: 433MhzOutdoor Synchronous Speed (open area): Max 1/500secIndoor Synchronous Speed: Max 1/250secHow to use: Make sure the channel selector of both transmitter and receiver at same position Insert your flash hot shoe socket into the receiver's hot shoe jack Press the test button on your transmitter. The Flash should now flash Insert the transmitter's hot shoe socket into your camera's hot shoe jack (if your camera does not have a hot shoe use a PC sync cord and insert into the socket) You should now be ready to start shootingWeight: 35 g

DSLRKIT 4 Channel Wireless Studio Flash Trigger AC-04 $13 DSLRKIT AC-04B 4 channels FM (Transmitter + Receiver) Set Wireless Flash Trigger for Studioextra receivers if you need:the transmitter of DSLRKIT brand can trigger all the reciever as long as it is DSLRKIT brand,eg. 4 Channel Transmitter can trigger the reciever from DC-01A, AC-01A, DC-02A, AC-02A, DC-04A, AC-04A, PT-04A, DC-16A, AC-16A;eg. 4 Channel Transmitter can trigger 16 Channel Receiver,but only work on 4 channels from the receiver(you have to find from the 16 Channel of the Receiver to see which 4 channels is work on).IntroductionThe brand is called DSLRKIT.The remote trigger for studio flashes and outdoor flash is used as the controller of synchronous trigger studio flash of cameras. It consists of a signal sender and a receiver trigger and works by means of the frequency modulation wireless remote control.The signal transmitter adopts the advanced circuit and components, and can transmit the coded FM wireless signa. The circuit of the transmitter has the function of standby and hibernation, thus it has low power consumption; the products can work under the standby mode for more than one year with only one battery; continuously trigger for thirty thousand times. the trigger current is only 0.01MA, which will definitely cause no damage to the flash contact of the camera. The transmitter is applicable to the traditional or digital camera with hot shoe or PC controlling interface.Receiver trigger adopts dry battery for power supply, which is safe, energy-saving, and convenient. The product adopts micro-computer for controlling the decoding, Which has superior anti-interference capability; sensitive reaction speed, the highest synchronous speed can reach 1/500 sec.TransmitterReceiver Power Source: 23AAC 100-230VOutdoor operating distance (open area):>30MIndoor operating distance: >10MFrequency Channel:4Operating Frequency: 433MhzOutdoor Synchronous Speed (open area):Max 1/500secIndoor Synchronous Speed: Max 1/250sec How to use: Make sure the channel selector of both transmitter and receiver at same position Insert the receiver's trigger output plug into your flash's jack Press the test button on your transmitter. The studio light should now flash Insert the transmitter's hot shoe socket into your camera's hot shoe jack (if your camera does not have a hot shoe use a PC sync cord and insert into the socket) You should now be ready to start shootingWeight: 35 g

DSLRKIT PT-04 Hot Shoe + Studio Strobe Flash Trigger $15 DSLRKIT PT-04 4 channels Wireless Flash Trigger SET for Studio Strobe Flash and Hot Shoe Flashthe transmitter of DSLRKIT brand can trigger all the reciever as long as it is DSLRKIT brand,eg. 4 Channel Transmitter can trigger the reciever from DC-01A, AC-01A, DC-02A, AC-02A, DC-04A, AC-04A, PT-04A, DC-16A, AC-16A;eg. 4 Channel Transmitter can trigger 16 Channel Receiver,but only work on 4 channels from the receiver(you have to find from the 16 Channel of the Receiver to see which 4 channels is work on). the transmitter of DSLRKIT brand can trigger all the reciever as long as it is DSLRKIT brand,eg. 4 Channel Transmitter can trigger the reciever from DC-01A, AC-01A, DC-02A, AC-02A, DC-04A, AC-04A, PT-04A, DC-16A, AC-16A;eg. 4 Channel Transmitter can trigger 16 Channel Receiver,but only work on 4 channels from the receiver(you have to find from the 16 Channel of the Receiver to see which 4 channels is work on).IntroductionThe brand is called DSLRKIT.The remote trigger for studio flashes and outdoor flash is used as the controller of synchronous trigger studio flash of cameras. It consists of a signal sender and a receiver trigger and works by means of the frequency modulation wireless remote control.The signal transmitter adopts the advanced circuit and components, and can transmit the coded FM wireless signa. The circuit of the transmitter has the function of standby and hibernation, thus it has low power consumption; the products can work under the standby mode for more than one year with only one battery; continuously trigger for thirty thousand times. the trigger current is only 0.01MA, which will definitely cause no damage to the flash contact of the camera. The transmitter is applicable to the traditional or digital camera with hot shoe or PC controlling interface.Receiver trigger adopts dry battery for power supply, which is safe, energy-saving, and convenient. The product adopts micro-computer for controlling the decoding, Which has superior anti-interference capability; sensitive reaction speed, the highest synchronous speed can reach 1/500 sec.All the models of the product uniquely have the multi-frequency isolation technique and the self coding matching function by users. Users can freely match and use the sender and the receiver according to the demands, which have four isolated channels to suit for specific shooting environments. Triggers set in different channels can be combined to work or independently work but do not interfere with each other in an efficient distance.Transmitter Receiver Power Source: 23A AC 100-230VOutdoor operating distance (open area):>30MIndoor operating distance:>10MFrequency Channel: 4Operating Frequency: 433MhzOutdoor Synchronous Speed (open area): Max 1/500secIndoor Synchronous Speed: Max 1/250secHow to use: Make sure the channel selector of both transmitter and receiver at same position Insert your flash hot shoe socket into the receiver's hot shoe jack Press the test button on your transmitter. The Fl

AC-04S1 Wireless Flash Trigger Set for Sony A550 A500 And Minolta Camera $18 The Flash Trigger only for Sony A580/A560/A550/A500 & Minolta CameraThe remote trigger for studio flashes and outdoor flash is used as the controller of synchronous trigger studio flash of cameras. It consists of a signal sender and a receiver trigger and works by means of the frequency modulation wireless remote control.The signal transmitter adopts the advanced circuit and components, and can transmit the coded FM wireless signa. The circuit of the transmitter has the function of standby and hibernation, thus it has low power consumption; The products can work under the standby mode for more than one year with only one batteryContinuously trigger for thirty thousand times. The trigger current is only 0.01MA, which will definitely cause no damage to the flash contact of the camera. The transmitter is applicable to the traditional or digital camera with hot shoe or PC controlling interface.Receiver trigger adopts dry battery for power supply, which is safe, energy-saving, and convenient. The product adopts micro-computer for controlling the decoding, which has superior anti-interference capability; Sensitive reaction speed, the highest synchronous speed can reach 1/500 sec.How to use:Make sure the channel selector of both transmitter and receiver at same positionInsert the receiver's trigger output plug into your flash's jackPress the test button on your transmitter. The studio light should now flashInsert the transmitter's hot shoe socket into your camera's hot shoe jack(if your camera does not have a hot shoe use a PC sync cord and insert into the socket)You should now be ready to start shootingPackage Included:4 Channel Transmitter x1AC-04A Receiver x123A battery(Transmitter inside) x1Sync cord for camera (2.5mm to Male) x16.35mm JACK to 3.5mm Plug PC Sync Adapter x1English Instruction Manual x1Size: 220*150*70 mm

Lumiere L.A. DC 2ch Slave Strobe Flash Trigger Kit $52.49 Shed some light on the subject with the Lumiere L.A. 2-channel slave strobe flash trigger kitLens and flash combination is a must for the serious photographerCamera accessory has bright flash for great lightingWireless radio ultrasonic camera flash trigger Connection 'hot shoe' and /or cable sync on the transmitter Receiver connected and powered by AC power cord Maximum Distance of transmission: 33 feet Manual release & test button on transmitter Dimension: 8 inches long x 6 inches wide x 1 inch deep Package content: 1 transmitter, 1 receiver, 1 power adaptor, 1 sync. cable

Lumiere L.A. AC 1-channel Slave Strobe Flash Trigger Kit $62.32 Shed some light on the subject with the Lumiere L.A. 1-channel slave strobe flash trigger kitLens and flash combination is a must for the serious photographerCamera accessory has bright flash for great lightingWireless radio ultrasonic camera flash trigger Connection 'hot shoe' and /or cable sync on the transmitter Receiver connected and powered by AC power cord Maximum Distance of transmission: 33 feet Manual release & test button on transmitter Dimension: 8 inches long x 7 inches wide x 1 inch deep Package content: 1 transmitter, 1 receiver, 1 power adaptor, 1 sync. cable

DC-04S1 Wireless Flash Trigger Set for Sony A580 A560 And Minolta Camera $17 This wireless trigger is control discreteness for camera to trigger the studio flash synchronously. It's made up of two parts named signal transmitter and receiver. Receiver power type: Battery. The signal transmitter makes use of advanced circuit design and comport, which hot shoe is specially designed for Sony and Minolta, It can transmit wireless signal that is being encoded. It can totally control four different flashes as the picture above showing us. The function of this item is the same as the original one called RD604. How to use:Insert the receiver's trigger output socket into your flash's jack. Press the test button on the transmitter. The studio light should now flash. Insert the transmitter's hot shoe socket into your camera's hot shoe jack. (If your camera does not have a hot shoe, use the included pc sync cord and insert into the camera's pc sync socket)NOTE:This Trigger can NOT work on TTL modeSpecification: Power supply of the signal transmitter: 23A 12V mini-battery (in the transmitter) Power supply of the receiver: two AAA batteries Max available in distance range: 50M (Open fields, no fraise) The output socket has two size are 6.35mm and 3.5mm Package Contents: 4 channel Radio Remote Flash Trigger Transmitter x1 4 channel Radio Remote Flash Trigger Receiver x1 Sync Wire Cable x1 3.5mm Output Socket x1 Heavy-Duty AAA Battery Size: 180*150*50 mm