Flash Trigger
Flash Trigger
 |
US $25.36
Perimenopause Symptoms -- Natural Remedies for Hot Flashes
A shocking 88% of Western women suffering from perimenopause symptoms are more or less tormented by hot flashes. Hot flashes are not life threatening. They just make your life miserable. Suddenly, you're hot and uncomfortable. You can be soaked in sweat or merely a moist blush. Night sweats wake you up several times a night. The lost sleep and low quality sleep can cause poor concentration, memory problems, irritability and exhaustion during the day.
A hot flash is caused by the body's temperature control system going berserk. For no good reason, your body-mind thinks it's overheated. The brain reacts as it normally does to cool down, but more sudden and intense. Blood vessels near the skin dilate and you break into a sweat. The causes of such thermal chaos are only partly understood by medical science. Hot flashes are linked to the fluctuating hormones that cause so many perimenopause symptoms, but other factors such as thyroid imbalances can cause your temperature control to go out of whack.
If you're concerned about the safety of hormone replacement therapy, there are many time-proven, natural remedies you could try first. Here are some ideas that have helped many women find relief:
- Track your hot flashes. Keep a record of when they occur and what you were eating or doing, or how you were feeling at the time. Look for your “triggers.” Some common triggers are: hot or spicy foods, alcohol, caffeinated drinks, cigarette smoke. Watch out for anything hot -- hot tubs, hot beds, hot rooms, hot weather, and hot showers. Avoid saunas. Sugar and, alas, chocolate are one of my biggest triggers.
- Many women find that stress tops the charts as a trigger. Was that hot flash at work a random hit, or were you feeling under pressure at the time? Was it a full day of pressure without a break? This is the time of life when nature forces you to slow down and take care of yourself.
- Dress in layers, so you can peel off one layer after another as you get warmer. Make sure the layer beneath the jacket you wear to work is something you won't mind showing if you need to take your jacket off during a meeting. Avoid turtlenecks. Don't wear wool or synthetics, and be wary of silk. That leaves cotton, linen, rayon, and more cotton.
- Try to notice the subtle signs right before a hot flash starts. You can often stop a hot flash or lessen its intensity by drinking cold water or touching something cold like metal or window glass. If you're home, an ice pack to the back of the neck can be very effective. The trick is to catch it early, before it really gets going.
- Sip ice water to cool down your insides. This one really works for me. I always keep a thermos of cold water with me. Best of all it's very unobtrusive if I can catch the hot flash before it gets going.
- Paced breathing. Two studies found that slow, deep breathing reduced the frequency of hot flashes by 39 percent and by 44 percent.
- Cooling exercise. Yoga is perfect and can also help balance your endocrine glands, reduce stress, and teach you the paced breathing exercises.
- Dietary supplements such as black cohosh, red clover, soy, and vitamin E can help control your hot flashes.
The frequency, duration, and intensity of hot flashes and all perimenopause symptoms vary widely from woman to woman and also for individual women during the various stages of menopause. Remember that you are unique and that what works for one woman may not help you. If one strategy doesn't provide relief, try another and discover what works for you.
About the Author
Catherine Galeana is a writer and photographer who survived menopause and shares what she learned in the process. Catherine says this about herself, "I was just getting into yoga when I started searching for help with my own perimenopause. And yoga led me to discover a wealth of safe, natural remedies that worked." Visit my blog, perimenopause-symptoms.org, to find out more about hot flashes and other perimenopause symptoms, and natural remedies that relieve them.
|
|
wholesale FOTGA Wireless flash trigger Set PT-04 TM 4 Channles For Canon Nikon Sony Camera and Flashes $12.09 Flash trigger PT-04 TM |
|
|
Trigger $9.49 Trigger |
|
|
Elinchrom Skyport Speed Transmitter Wireless Flash Trigger $119.99 This wireless flash trigger operates at a range of up to 198' indoors and 474' outdoors. Support for up to 4 separate lighting groups makes it simple to set up lighting ratios. |
|
|
Nice AC-04 4 channel Wireless Studio Flash Trigger+Receiver $18.11 - The remote trigger for studio flashes and outdoor flash is used as the controller of synchronous trigger studio flash of cameras- It consisits of a signal sender and a receiver trigger and works by means of the frequency modulation wireless remote control- Outdoor operating distance: 30M- Indoor operating distance: 10m |
|
|
4 Channel FM Wireless Studio Flash Trigger PT-04 with Umbrella Holder $19.59 - The remote trigger for studio flash and outdoor flash is used as the controller of synchronous trigger studio flash of cameras- The highest synchronous speed can reach 1/250 sec- Power source: transmitter: 1 X 23A battery ????????????? receiver: 2 x AAA battery |
|
|
DSLRKIT Flash Trigger Receiver PT-04NE Umbrella Holder $12 DSLRKIT PT-04NE 4 channels FM Receiver for Wireless Flash Trigger Studiothe item is with an umbrella holder,therefore there is no necessory to use a light stand bracket, and the flash effectiveness is the same as the item that is used with a light stand bracket.Notice:The item must use with the "Transmitter" togetherthe transmitter of DSLRKIT brand can trigger all the reciever as long as it is DSLRKIT brand,eg. 4 Channel Transmitter can trigger the reciever from DC-01A, AC-01A, DC-02A, AC-02A, DC-04A, AC-04A, PT-04A, DC-16A, AC-16A;eg. 4 Channel Transmitter can trigger 16 Channel Receiver,but only work on 4 channels from the receiver(you have to find from the 16 Channel of the Receiver to see which 4 channels is work on).IntroductionThe brand is called DSLRKIT.The remote trigger for studio flashes and outdoor flash is used as the controller of synchronous trigger studio flash of cameras. It consists of a signal sender and a receiver trigger and works by means of the frequency modulation wireless remote control.The signal transmitter adopts the advanced circuit and components, and can transmit the coded FM wireless signa. The circuit of the transmitter has the function of standby and hibernation, thus it has low power consumption; the products can work under the standby mode for more than one year with only one battery; continuously trigger for thirty thousand times. the trigger current is only 0.01MA, which will definitely cause no damage to the flash contact of the camera. The transmitter is applicable to the traditional or digital camera with hot shoe or PC controlling interface.Receiver trigger adopts dry battery for power supply, which is safe, energy-saving, and convenient. The product adopts micro-computer for controlling the decoding, Which has superior anti-interference capability; sensitive reaction speed, the highest synchronous speed can reach 1/500 sec.All the models of the product uniquely have the multi-frequency isolation technique and the self coding matching function by users. Users can freely match and use the sender and the receiver according to the demands, which have four isolated channels to suit for specific shooting environments. Triggers set in different channels can be combined to work or independently work but do not interfere with each other in an efficient distance.Transmitter Receiver Power Source: 23A AC 100-230V Outdoor operating distance (open area): >30MIndoor operating distance: >10MFrequency Channel: 4Operating Frequency: 433MhzOutdoor Synchronous Speed (open area): Max 1/500secIndoor Synchronous Speed: Max 1/250secHow to use: Make sure the channel selector of both transmitter and receiver at same position Insert the receiver's trigger output plug into your flash's jack Press the test button on your transmitter. The studio light should now flash Insert the transmitter's hot shoe socket into your camera's hot shoe jack (if your camera does not have a hot shoe use a PC sync cord and insert into th |
|
|
Studio Flash Trigger 3.5mm PC to Dual Hot shoe Adapter $5.41 - 3.5mm PC SYNC to Dual Hot Adapter Adapter- Only using 1 x Trigger Receiver to control 2 x Flash Speedlite at the same time |
|
|
DSLRKIT 4 channel Receiver PT-04 for Flash Trigger $11 DSLRKIT PT-04A 4 channels FM Receiver for Wireless Flash Trigger StudioNotice:The item must use with the "Transmitter" togetherthe transmitter of DSLRKIT brand can trigger all the reciever as long as it is DSLRKIT brand,eg. 4 Channel Transmitter can trigger the reciever from DC-01A, AC-01A, DC-02A, AC-02A, DC-04A, AC-04A, PT-04A, DC-16A, AC-16A;eg. 4 Channel Transmitter can trigger 16 Channel Receiver,but only work on 4 channels from the receiver(you have to find from the 16 Channel of the Receiver to see which 4 channels is work on). IntroductionThe brand is called DSLRKIT.The remote trigger for studio flashes and outdoor flash is used as the controller of synchronous trigger studio flash of cameras. It consists of a signal sender and a receiver trigger and works by means of the frequency modulation wireless remote control.The signal transmitter adopts the advanced circuit and components, and can transmit the coded FM wireless signa. The circuit of the transmitter has the function of standby and hibernation, thus it has low power consumption; the products can work under the standby mode for more than one year with only one battery; continuously trigger for thirty thousand times. the trigger current is only 0.01MA, which will definitely cause no damage to the flash contact of the camera. The transmitter is applicable to the traditional or digital camera with hot shoe or PC controlling interface.Receiver trigger adopts dry battery for power supply, which is safe, energy-saving, and convenient. The product adopts micro-computer for controlling the decoding, Which has superior anti-interference capability; sensitive reaction speed, the highest synchronous speed can reach 1/500 sec.All the models of the product uniquely have the multi-frequency isolation technique and the self coding matching function by users. Users can freely match and use the sender and the receiver according to the demands, which have four isolated channels to suit for specific shooting environments. Triggers set in different channels can be combined to work or independently work but do not interfere with each other in an efficient distance.TransmitterReceiver Power Source: 23A AC 100-230V Outdoor operating distance (open area): >30MIndoor operating distance: >10MFrequency Channel: 4Operating Frequency: 433MhzOutdoor Synchronous Speed (open area): Max 1/500secIndoor Synchronous Speed: Max 1/250secHow to use: Make sure the channel selector of both transmitter and receiver at same position Insert your flash hot shoe socket into the receiver's hot shoe jack Press the test button on your transmitter. The Flash should now flash Insert the transmitter's hot shoe socket into your camera's hot shoe jack (if your camera does not have a hot shoe use a PC sync cord and insert into the socket) You should now be ready to start shootingSuitable ForCanon SpeedLite 580EX II, 580EX, 550EX, 540EZ, 520EZ,430EX/EXII, 430EZ, 420EX, 420EZ, 380EX;Nikon SpeedLight SB-900, SB-800, SB-600, |
|
|
CTR-301P Flash Sync Trigger Remote Control $23 - Model: CTR-301P- Use the transmitter and receiver to control the flashlight (radio frequency control)- Also you can use only the receiver to control the flashlight (triggered by light within 10 meters)- Trigger the vedio flash after connect the PC Sync port- Distance >= 30m- 1x23A + 1xCR2 included- 2.5mm PC sync cable includedSpecificationsDimensions: 0 in x 0 in x 0 inWeight: 4.23 oz |
|
|
DSLRKIT RF-16NE Flash Trigger for NIKON Umbrella holder $35.8 DSLRKIT RF-16NE Wireless Remote Flash Trigger for NikonThis flash remote trigger can work as flashgun trigger, studio light trigger, and work with extra shutter remote cord, it can remote control the camera, just like the wireless remote shutter release, support half-press focusing and full-press take the picture.The flash sync speed is up to 1/250s. The shutter control mode included single, continuous, BULB and 4sec delay shooting.Transmitter has a 3.5mm input socket witch can connect with your cameras PC sync port. in this case, you can keep on use your hot shoe and trigger the other flashes.Receiver has a 3.5mm output socket.It can be use to connect your cameras shutter remote port(Need extra shutter connect cable), or connect the studio flash via attached 3.5mm to 3.5mm sync cord, or connect with the flash via PC sync cord (need to purchase extra 3.5mm to PC sync cable).And as you can see, in addition to those function, it also have an umbrella holder. So there is no need to use a light stand bracket, and the flash effectiveness is the same as the item that is used with a light stand bracket.RF-16NE is using global free channel 2.4GHz and FSK modulation system to make the performance more stable, and work in bigger distance. Particular saving power design can make the transmitter and receiver battery last more time.Using global free 2.4GHz channel and FSK modulation system, and there's 16 selectable frequency channels.Flash sync speed is up to 1/250s.Support the TTL flashgun wake-up function; you'll never miss any shot opportunity.Fire the flashgun through hot shoe part and fire the studio light through 3.5mm to 3.5mm cable. (you can change 3.5mm to 6.35mm via attached convert adapter)Supports to control multiple flashguns and studio lights at same time.Shutter function mode, included single, continuous, bulb and 4sec delay shooting.Supports to control multiple cameras to take shots at the same time.Operating distance is more than 100 meters. (outdoor without obstacle, we tested the max distance is 200 meters)Ultra-low standby power consumption; transmitter standby time is more than 2 years, and receiver standby time up to 300 hours.Low voltage design, it's able to use rechargeable batteries.Power supply use 2*AAA batteries.(transmitter and receiver)With umbrella holderFunctionsType:Using FSK 2.4GHz Wireless Remote Control SystemOperation Range:100 metersChannel:16Shutter releaseHalf-perss, Full-pressTransmitter stand-by time:2 years or >10000 Timer (2x AAA alkaline cell);Receiver stand-by time:45 Hours(2x AAA alkaline cell)Transmitter compatible with the device under flash trigger mode:Model Compatible deviceRF-16 NETX for CanonCanon EOS: 1D series, 5D series, 7D, 60D, 50D, 40D. 30D, 20D, 10D,600D,550D, 500D, 450D, 400D, 350D,1100D, 1000D Rebel T3i, T3, T2i,T1i,XSi,XS,Xti,Xt,Powershot G10, G11, G12.RF-16 NETXfor Nikon Nikon: D7000, D5000, D5100, D3100, D3000,D3, D700, D2 series, D300 series, D200,D90, D80s D70 series, D60, D50, D40 series |
|
|
DSLRKIT RF-16NE Flash Trigger for CANON Umbrella holder $35.8 DSLRKIT RF-16NE Wireless Remote Flash Trigger for CanonThis flash remote trigger can work as flashgun trigger, studio light trigger, and work with extra shutter remote cord, it can remote control the camera, just like the wireless remote shutter release, support half-press focusing and full-press take the picture.The flash sync speed is up to 1/250s.The shutter control mode included single, continuous, BULB and 4sec delay shooting.Transmitter has a 3.5mm input socket witch can connect with your cameras PC sync port. in this case, you can keep on use your hot shoe and trigger the other flashes.Receiver has a 3.5mm output socket.It can be use to connect your cameras shutter remote port(Need extra shutter connect cable), or connect the studio flash via attached 3.5mm to 3.5mm sync cord, or connect with the flash via PC sync cord (need to purchase extra 3.5mm to PC sync cable).And as you can see, in addition to those function, it also have an umbrella holder.So there is no need to use a light stand bracket, and the flash effectiveness is the same as the item that is used with a light stand bracket.RF-16NE is using global free channel 2.4GHz and FSK modulation system to make the performance more stable, and work in bigger distance.Particular saving power design can make the transmitter and receiver battery last more time.Features:Using global free 2.4GHz channel and FSK modulation system, and there's 16 selectable frequency channels.Flash sync speed is up to 1/250s.Support the TTL flashgun wake-up function; you'll never miss any shot opportunity.Fire the flashgun through hot shoe part and fire the studio light through 3.5mm to 3.5mm cable. (you can change 3.5mm to 6.35mm via attached convert adapterSupports to control multiple flashguns and studio lights at same time.Shutter function mode, included single, continuous, bulb and 4sec delay shooting.Supports to control multiple cameras to take shots at the same time.Operating distance is more than 100 meters. (outdoor without obstacle, we tested the max distance is 200 meters)Ultra-low standby power consumption; transmitter standby time is more than 2 years, and receiver standby time up to 300 hours.Low voltage design, it's able to use rechargeable batteries.Power supply use 2*AAA batteries.(transmitter and receiver)With umbrella holderFunctions Type:Using FSK 2.4GHz Wireless Remote Control SystemOperation Range:100 metersChannel:16Shutter releaseHalf-perss, Full-pressTransmitter stand-by time:2 years or >10000 Timer (2x AAA alkaline cell)Receiver stand-by time:45 Hours(2x AAA alkaline cell)Dimensions ( W x L x H):Transmitter,76mm x 36 mm x 35mm;Receiver,76mm x 61 mm x 38.7 mmTransmitter compatible with the device under flash trigger mode:ModelCompatible deviceRF-16NETXfor CanonCanon EOS: 1D series, 5D series, 7D,60D, 50D, 40D. 30D, 20D, 10D,600D,550D, 500D, 450D, 400D, 350D,1100D, 1000D Rebel T3i, T3, T2i,T1i,XSi,XS,Xti,Xt,Powershot G10, G11, G12.RF-16NETX for Nikon Nikon: D7000, D5000, D5100, D3100, |
|
|
Nice AC-04 Universal Wired Studio Flash Trigger Receiver $11.06 - The wired trigger receiver for studio flashes is used as the controller of synchronous trigger studio flash of cameras- The signal transmitter adopts the advanced circuit and components- It has low power consumption, superior anti-interference capability- High sensitivity, and easy to use |
|
|
Nice DC-04 Universal 4 Channel Wired Studio Flash Trigger Receiver $9.48 - The wired trigger receiver for studio flashes is used as the controller of synchronous trigger studio flash of cameras- The signal transmitter adopts the advanced circuit and components- It has low power consumption, superior anti-interference capability- High sensitivity, and easy to use |
|
|
PE-16NE 3-in-1 Wireless Remote Flash Trigger Single Receiver with Umbrella Holder $18.95 - Use global free-change frequency 2.4GHz,? and 16 selectable channels. - Maximum sync speed comes to 1/200s - Receiver with umbrella holder - Trigger the flash light through hot-shoe,? and trigger the studio light through Receiver to 6.35mm Jack Sync Cable or? Receiver to 3.50mm Jack Sync Cable. - Supports multiple outdoor flash light and studio lights. - Maximum operating distance comes to 100 meters. - Receiver battery: 2*AAA batteries (not included) - Functions:Trigger speedlite/Trigger Studio strobe/Play as remote shutter release/Control several flashes - Single receiver only ? ? |
|
|
Low Voltage Trigger Power-Saving Flash Flashlight(Black) $12.91 - Low voltage trigger and power saving flash.- Effective angle (horizontal x vertical): 60 degree * 40 degree.- Power source: 2-1.5AA.- Recycle time(manual): 5-7S.- Flash duration: 1/1000S.- Color temperature: 5600k.- Powered by two AA batteries (Batteries not included).- Brand new product with high quality |
|
|
16 Channel Wireless Hot Shoe Flash Remote Trigger Receiver for Canon Sony Nikon Olympus Camera $19.99 16 Channel Wireless Hot Shoe Flash Remote Trigger Receiver for Canon Sony Nikon Olympus Camera |
|
|
4 Channel Wireless Hot Shoe Flash Remote Trigger Receiver for Canon Sony Nikon Olympus Camera $18.99 4 Channel Wireless Hot Shoe Flash Remote Trigger Receiver for Canon Sony Nikon Olympus Camera |
|
|
Nice PT-04NE Hot Shoe Studio Strobe Flash Trigger Umbrella Holder $38.19 Overview:Nice PT-04NE 4 channels Wireless Flash Trigger SET for Studio Strobe Flash and Hot Shoe Flashthe item is with an umbrella holder,therefore there is no necessory to use a light stand bracket, and the flash effectiveness is the same as the item that is used with a light stand bracket.the transmitter of Nice brand can trigger all the reciever as long as it is Nice brand,eg. 4 Channel Transmitter can trigger the reciever from DC-01A, AC-01A, DC-02A, AC-02A, DC-04A, AC-04A, PT-04, DC-16A, AC-16A;eg. 4 Channel Transmitter can trigger 16 Channel Receiver,but only work on 4 channels from the receiver(you have to find from the 16 Channel of the Receiver to see which 4 channels is work on).IntroductionThe brand is called Nice.The remote trigger for studio flashes and outdoor flash is used as the controller of synchronous trigger studio flash of cameras. It consists of a signal sender and a receiver trigger and works by means of the frequency modulation wireless remote control.The signal transmitter adopts the advanced circuit and components, and can transmit the coded FM wireless signa. The circuit of the transmitter has the function of standby and hibernation, thus it has low power consumption; the products can work under the standby mode for more than one year with only one battery; continuously trigger for thirty thousand times. the trigger current is only 0.01MA, which will definitely cause no damage to the flash contact of the camera. The transmitter is applicable to the traditional or digital camera with hot shoe or PC controlling interface.Receiver trigger adopts dry battery for power supply, which is safe, energy-saving, and convenient. The product adopts micro-computer for controlling the decoding, Which has superior anti-interference capability; sensitive reaction speed, the highest synchronous speed can reach 1/500 sec.All the models of the product uniquely have the multi-frequency isolation technique and the self coding matching function by users. Users can freely match and use the sender and the receiver according to the demands, which have four isolated channels to suit for specific shooting environments. Triggers set in different channels can be combined to work or independently work but do not interfere with each other in an efficient distance.Technique Parameter: Transmitter Receiver Power Source 23A AC 100-230V Outdoor operating distance (open area) gt;30M Indoor operating distance gt;10M Frequency Channel 4 Operating Frequency 433Mhz Outdoor Synchronous Speed (open area) Max 1/500sec Indoor Synchronous Speed Max 1/250secHow to use:• Make sure the channel selector of both transmitter and receiver at same position• Insert the receiver's trigger output plug into |
|
|
DSLRKIT 4 channel Studio Flash Trigger Receiver AC-04 $9 DSLRKIT AC-04B 4 channels FM Receiver for Wireless Flash Trigger StudioNotice: The item must use with the "Transmitter" togetherthe transmitter of DSLRKIT brand can trigger all the reciever as long as it is DSLRKIT brand,eg. 4 Channel Transmitter can trigger the reciever from DC-01A, AC-01A, DC-02A, AC-02A, DC-04A, AC-04A, PT-04A, DC-16A, AC-16A;eg. 4 Channel Transmitter can trigger 16 Channel Receiver,but only work on 4 channels from the receiver(you have to find from the 16 Channel of the Receiver to see which 4 channels is work on). IntroductionThe brand is called DSLRKIT.The remote trigger for studio flashes and outdoor flash is used as the controller of synchronous trigger studio flash of cameras. It consists of a signal sender and a receiver trigger and works by means of the frequency modulation wireless remote control.The signal transmitter adopts the advanced circuit and components, and can transmit the coded FM wireless signa. The circuit of the transmitter has the function of standby and hibernation, thus it has low power consumption; the products can work under the standby mode for more than one year with only one battery; continuously trigger for thirty thousand times. the trigger current is only 0.01MA, which will definitely cause no damage to the flash contact of the camera. The transmitter is applicable to the traditional or digital camera with hot shoe or PC controlling interface.Receiver trigger adopts dry battery for power supply, which is safe, energy-saving, and convenient. The product adopts micro-computer for controlling the decoding, Which has superior anti-interference capability; sensitive reaction speed, the highest synchronous speed can reach 1/500 sec.Transmitter ReceiverPower Source:23AAC 100-230VOutdoor operating distance (open area): >30MIndoor operating distance: >10MFrequency Channel:4Operating Frequency: 433MhzOutdoor Synchronous Speed (open area): Max 1/500secIndoor Synchronous Speed: Max 1/250secHow to use: Make sure the channel selector of both transmitter and receiver at same position Insert the receiver's trigger output plug into your flash's jack Press the test button on your transmitter. The studio light should now flash Insert the transmitter's hot shoe socket into your camera's hot shoe jack(if your camera does not have a hot shoe use a PC sync cord and insert into the socket) You should now be ready to start shootingWeight: 107 g |
|
|
DSLRKIT 4 Channel Wireless Studio Flash Trigger AC-04 $13 DSLRKIT AC-04B 4 channels FM (Transmitter + Receiver) Set Wireless Flash Trigger for Studioextra receivers if you need:the transmitter of DSLRKIT brand can trigger all the reciever as long as it is DSLRKIT brand,eg. 4 Channel Transmitter can trigger the reciever from DC-01A, AC-01A, DC-02A, AC-02A, DC-04A, AC-04A, PT-04A, DC-16A, AC-16A;eg. 4 Channel Transmitter can trigger 16 Channel Receiver,but only work on 4 channels from the receiver(you have to find from the 16 Channel of the Receiver to see which 4 channels is work on).IntroductionThe brand is called DSLRKIT.The remote trigger for studio flashes and outdoor flash is used as the controller of synchronous trigger studio flash of cameras. It consists of a signal sender and a receiver trigger and works by means of the frequency modulation wireless remote control.The signal transmitter adopts the advanced circuit and components, and can transmit the coded FM wireless signa. The circuit of the transmitter has the function of standby and hibernation, thus it has low power consumption; the products can work under the standby mode for more than one year with only one battery; continuously trigger for thirty thousand times. the trigger current is only 0.01MA, which will definitely cause no damage to the flash contact of the camera. The transmitter is applicable to the traditional or digital camera with hot shoe or PC controlling interface.Receiver trigger adopts dry battery for power supply, which is safe, energy-saving, and convenient. The product adopts micro-computer for controlling the decoding, Which has superior anti-interference capability; sensitive reaction speed, the highest synchronous speed can reach 1/500 sec.TransmitterReceiver Power Source: 23AAC 100-230VOutdoor operating distance (open area):>30MIndoor operating distance: >10MFrequency Channel:4Operating Frequency: 433MhzOutdoor Synchronous Speed (open area):Max 1/500secIndoor Synchronous Speed: Max 1/250sec How to use: Make sure the channel selector of both transmitter and receiver at same position Insert the receiver's trigger output plug into your flash's jack Press the test button on your transmitter. The studio light should now flash Insert the transmitter's hot shoe socket into your camera's hot shoe jack (if your camera does not have a hot shoe use a PC sync cord and insert into the socket) You should now be ready to start shootingWeight: 35 g |
|
|
AC-04S1 Wireless Flash Trigger Set for Sony A550 A500 And Minolta Camera $18 The Flash Trigger only for Sony A580/A560/A550/A500 & Minolta CameraThe remote trigger for studio flashes and outdoor flash is used as the controller of synchronous trigger studio flash of cameras. It consists of a signal sender and a receiver trigger and works by means of the frequency modulation wireless remote control.The signal transmitter adopts the advanced circuit and components, and can transmit the coded FM wireless signa. The circuit of the transmitter has the function of standby and hibernation, thus it has low power consumption; The products can work under the standby mode for more than one year with only one batteryContinuously trigger for thirty thousand times. The trigger current is only 0.01MA, which will definitely cause no damage to the flash contact of the camera. The transmitter is applicable to the traditional or digital camera with hot shoe or PC controlling interface.Receiver trigger adopts dry battery for power supply, which is safe, energy-saving, and convenient. The product adopts micro-computer for controlling the decoding, which has superior anti-interference capability; Sensitive reaction speed, the highest synchronous speed can reach 1/500 sec.How to use:Make sure the channel selector of both transmitter and receiver at same positionInsert the receiver's trigger output plug into your flash's jackPress the test button on your transmitter. The studio light should now flashInsert the transmitter's hot shoe socket into your camera's hot shoe jack(if your camera does not have a hot shoe use a PC sync cord and insert into the socket)You should now be ready to start shootingPackage Included:4 Channel Transmitter x1AC-04A Receiver x123A battery(Transmitter inside) x1Sync cord for camera (2.5mm to Male) x16.35mm JACK to 3.5mm Plug PC Sync Adapter x1English Instruction Manual x1Size: 220*150*70 mm |
|
|
DSLRKIT 4 Channel Wireless Studio Flash Trigger DC-04 $13 DSLRKIT DC-04A 4 channels FM (Transmitter + Receiver) Set Wireless Flash Trigger for Studiothe transmitter of DSLRKIT brand can trigger all the reciever as long as it is DSLRKIT brand,eg. 4 Channel Transmitter can trigger the reciever from DC-01A, AC-01A, DC-02A, AC-02A, DC-04A, AC-04A, PT-04A, DC-16A, AC-16A;eg. 4 Channel Transmitter can trigger 16 Channel Receiver,but only work on 4 channels from the receiver(you have to find from the 16 Channel of the Receiver to see which 4 channels is work on). Introduction：The brand is called DSLRKIT.The remote trigger for studio flashes and outdoor flash is used as the controller of synchronous trigger studio flash of cameras. It consists of a signal sender and a receiver trigger and works by means of the frequency modulation wireless remote control.The signal transmitter adopts the advanced circuit and components, and can transmit the coded FM wireless signa. The circuit of the transmitter has the function of standby and hibernation, thus it has low power consumption; the products can work under the standby mode for more than one year with only one battery; continuously trigger for thirty thousand times. the trigger current is only 0.01MA, which will definitely cause no damage to the flash contact of the camera. The transmitter is applicable to the traditional or digital camera with hot shoe or PC controlling interface.Receiver trigger adopts dry battery for power supply, which is safe, energy-saving, and convenient. The product adopts micro-computer for controlling the decoding, Which has superior anti-interference capability; sensitive reaction speed, the highest synchronous speed can reach 1/500 sec.Transmitter Receiver Power Source: 12V 23AAAA x2Outdoor operating distance (open area): >30MIndoor operating distance: >10MFrequency Channel: 4Operating Frequency: 433MhzOutdoor Synchronous Speed (open area): Max 1/500secIndoor Synchronous Speed: Max 1/250secHow to use: Make sure the channel selector of both transmitter and receiver at same position Insert your flash hot shoe socket into the receiver's hot shoe jack Press the test button on your transmitter. The Flash should now flash Insert the transmitter's hot shoe socket into your camera's hot shoe jack (if your camera does not have a hot shoe use a PC sync cord and insert into the socket) You should now be ready to start shootingWeight: 35 g |
|
|
Nice PT-04GY Universal 4 Channel FM Radio Wireless Flash Trigger Set $17.49 - The remote trigger for studio flash and outdoor flash is used as the controller of synchronous trigger studio flash of cameras- Frequency: 433? MHZ- Channels: 4 channels- Sync speed: 1/250s- Strobe and speedlite< 30 m- Transmitter: 23A 12V- Receiver: 2*1.5V AAA |
|
|
Nice PT-04NE Universal 4 Channel FM Radio Wireless Flash Trigger Set $18.99 - The remote trigger for studio flash and outdoor flash is used as the controller of synchronous trigger studio flash of cameras- Frequency: 433? MHZ- Channels: 4 channels- Sync speed: 1/250s- Strobe and speedlite< 30 m- Transmitter: 23A 12V- Receiver: 2*1.5V AAA |
|
|
PR-02A Wireless Flash Radio Remote Trigger with Umbrella Holder $26.34 - Working frequency: 433MHz - Maximum sync speed comes to 1/500s - Receiver with umbrella holder - Supports multiple outdoor flash light and studio lights. - Maximum operating distance comes to?30 meters. - Receiver battery: AAA batteries (not included) - Transmitter battery: 23A-12V battery - Functions:Trigger speedlite/Trigger Studio strobe/Play as remote shutter release/Control several flashes - Package?included 1 x receiver 1 x transmitter 1 x cable 1 x user manual? ? ? |
|
|
CTR-301P Flash Sync Trigger Remote Control (Receiver Only) $16.9 Note: This listing is for the receiver only. If you want to purchase the complete set, please visit here:http://www.bestofferbuy.com/ctr301p-flash-sync-trigger-remote-control-p-28113.htmlModel: CTR-301PUse the transmitter and receiver to control the flashlight (radio frequency control) Also you can use only the receiver to control the flashlight (triggered by light within 10 meters)Trigger the vedio flash after connect the PC Sync portDistance >= 30m1x23A + 1xCR2 included2.5mm PC sync cable includedWeight: 4.23 oz/120 g |
|
|
Lumiere L.A. DC 2ch Slave Strobe Flash Trigger Kit $52.49 Shed some light on the subject with the Lumiere L.A. 2-channel slave strobe flash trigger kitLens and flash combination is a must for the serious photographerCamera accessory has bright flash for great lightingWireless radio ultrasonic camera flash trigger Connection 'hot shoe' and /or cable sync on the transmitter Receiver connected and powered by AC power cord Maximum Distance of transmission: 33 feet Manual release & test button on transmitter Dimension: 8 inches long x 6 inches wide x 1 inch deep Package content: 1 transmitter, 1 receiver, 1 power adaptor, 1 sync. cable |
|
|
Lumiere L.A. AC 1-channel Slave Strobe Flash Trigger Kit $52.49 Shed some light on the subject with the Lumiere L.A. 1-channel slave strobe flash trigger kitLens and flash combination is a must for the serious photographerCamera accessory has bright flash for great lightingWireless radio ultrasonic camera flash trigger Connection 'hot shoe' and /or cable sync on the transmitter Receiver connected and powered by AC power cord Maximum Distance of transmission: 33 feet Manual release & test button on transmitter Dimension: 8 inches long x 7 inches wide x 1 inch deep Package content: 1 transmitter, 1 receiver, 1 power adaptor, 1 sync. cable |
|
|
RF-16NE Wireless Remote Flash Trigger Receiver for NIKON $33.33 - World wide free 2.4GHz frequency - FSK system with 16 selectable channels - Operating distance up to 100M - Flash sync speed up to 1/250sec - Shutter remote control function(need extra shutter connecting cord) - With wake up funcion for TTL flash gun - Wigh umbrella holder - Powered by AAA type battery included |
|
|
RF-16NE Wireless Remote Flash Trigger Receiver for Canon $33.39 - World wide free 2.4GHz frequency - FSK system with 16 selectable channels - Operating distance up to 100M - Flash sync speed up to 1/250sec - Shutter remote control function(need extra shutter connecting cord) - With wake up funcion for TTL flash gun - Wigh umbrella holder - Powered by AAA type battery included |
|
|
DSLRKIT 4 channel Studio Flash Trigger Receiver DC-04 $8 DSLRKIT DC-04A 4 channels FM Receiver for Wireless Flash Trigger StudioNotice:The item must use with the "Transmitter" togetherthe transmitter of DSLRKIT brand can trigger all the reciever as long as it is DSLRKIT brand,eg. 4 Channel Transmitter can trigger the reciever from DC-01A, AC-01A, DC-02A, AC-02A, DC-04A, AC-04A, PT-04A, DC-16A, AC-16A;eg. 4 Channel Transmitter can trigger 16 Channel Receiver,but only work on 4 channels from the receiver(you have to find from the 16 Channel of the Receiver to see which 4 channels is work on).IntroductionThe brand is called DSLRKIT.The remote trigger for studio flashes and outdoor flash is used as the controller of synchronous trigger studio flash of cameras. It consists of a signal sender and a receiver trigger and works by means of the frequency modulation wireless remote control.The signal transmitter adopts the advanced circuit and components, and can transmit the coded FM wireless signa. The circuit of the transmitter has the function of standby and hibernation, thus it has low power consumption; the products can work under the standby mode for more than one year with only one battery; continuously trigger for thirty thousand times. the trigger current is only 0.01MA, which will definitely cause no damage to the flash contact of the camera. The transmitter is applicable to the traditional or digital camera with hot shoe or PC controlling interface.Receiver trigger adopts dry battery for power supply, which is safe, energy-saving, and convenient. The product adopts micro-computer for controlling the decoding, Which has superior anti-interference capability; sensitive reaction speed, the highest synchronous speed can reach 1/500 sec.TransmitterReceiverPower Source:23A AC 100-230V Outdoor operating distance (open area): >30MIndoor operating distance: >10MFrequency Channel: 4Operating Frequency: 433MhzOutdoor Synchronous Speed (open area): Max 1/500secIndoor Synchronous Speed: Max 1/250secTransmitter not includethe transmitter of DSLRKIT brand can trigger all the reciever as long as it is DSLRKIT brand,eg. 4 Channel Transmitter can trigger the reciever from DC-01A, AC-01A, DC-02A, AC-02A, DC-04A, AC-04A, PT-04A, DC-16A, AC-16A; 16 Channel Transmitter can trigger the reciever from DC-01A, AC-01A, DC-02A, AC-02A, DC-04A, AC-04A, PT-04A, DC-16A, AC-16A;eg. 4 Channel Transmitter can trigger 16 Channel Receiver,but only work on 4 channels from the receiver(you have to find from the 16 Channel of the Receiver to see which 4 channels is work on).eg. 16 Channel Transmitter can trigger 4 Channel Receiver,but only work on 4 channels from the transmitter(you have to find from the 16 Channel of the Transmitter to see which 4 channels is work on).eg. 4 Channel Transmitter can trigger 1 Channel Receiver,but only work on 4 channels from the receiver(you have to find from the 1 Channel of the Transmitter to see which 4 channels is work on).eg. 1 Channel Transmitter can trigger 4 Channel Receiver,but only |
|
|
PE-16NE 3-in-1 Wireless Remote Flash Trigger Set with Umbrella Holder $30.63 - Use global free-change frequency 2.4GHz,? and 16 selectable channels. - Maximum sync speed comes to 1/200s - Receiver with umbrella holder - Trigger the flash light through hot-shoe,? and trigger the studio light through Receiver to 6.35mm Jack Sync Cable or? Receiver to 3.50mm Jack Sync Cable. - Supports multiple outdoor flash light and studio lights. - Maximum operating distance comes to 100 meters. - Receiver battery: 2*AAA batteries (not included) - Transmitter battery: 1*23A 12V battery (included) - Functions:Trigger speedlite/Trigger Studio strobe/Play as remote shutter release/Control several flashes - Package included 1 x Transmitter 1 x Receiver 1 x Receiver to 6.35mm Jack Sync Cable (for Studio Light/Strobes) 1 x Receiver to 3.50mm Jack Sync Cable (for Studio Light/Strobes) 1 x 2.50mm Jack to PC Sync Cable (Transmitter to Camera) 1 x Trigger safety seat 1 x Transmitter 23A 12V Batteries 1 x PE-16NE User Manual ? |
|
|
DC-04S1 Wireless Flash Trigger Set for Sony A580 A560 And Minolta Camera $17 This wireless trigger is control discreteness for camera to trigger the studio flash synchronously. It's made up of two parts named signal transmitter and receiver. Receiver power type: Battery. The signal transmitter makes use of advanced circuit design and comport, which hot shoe is specially designed for Sony and Minolta, It can transmit wireless signal that is being encoded. It can totally control four different flashes as the picture above showing us. The function of this item is the same as the original one called RD604. How to use:Insert the receiver's trigger output socket into your flash's jack. Press the test button on the transmitter. The studio light should now flash. Insert the transmitter's hot shoe socket into your camera's hot shoe jack. (If your camera does not have a hot shoe, use the included pc sync cord and insert into the camera's pc sync socket)NOTE:This Trigger can NOT work on TTL modeSpecification: Power supply of the signal transmitter: 23A 12V mini-battery (in the transmitter) Power supply of the receiver: two AAA batteries Max available in distance range: 50M (Open fields, no fraise) The output socket has two size are 6.35mm and 3.5mm Package Contents: 4 channel Radio Remote Flash Trigger Transmitter x1 4 channel Radio Remote Flash Trigger Receiver x1 Sync Wire Cable x1 3.5mm Output Socket x1 Heavy-Duty AAA Battery Size: 180*150*50 mm |
|
|
DSLRKIT PT-04 Hot Shoe + Studio Strobe Flash Trigger $15 DSLRKIT PT-04 4 channels Wireless Flash Trigger SET for Studio Strobe Flash and Hot Shoe Flashthe transmitter of DSLRKIT brand can trigger all the reciever as long as it is DSLRKIT brand,eg. 4 Channel Transmitter can trigger the reciever from DC-01A, AC-01A, DC-02A, AC-02A, DC-04A, AC-04A, PT-04A, DC-16A, AC-16A;eg. 4 Channel Transmitter can trigger 16 Channel Receiver,but only work on 4 channels from the receiver(you have to find from the 16 Channel of the Receiver to see which 4 channels is work on). the transmitter of DSLRKIT brand can trigger all the reciever as long as it is DSLRKIT brand,eg. 4 Channel Transmitter can trigger the reciever from DC-01A, AC-01A, DC-02A, AC-02A, DC-04A, AC-04A, PT-04A, DC-16A, AC-16A;eg. 4 Channel Transmitter can trigger 16 Channel Receiver,but only work on 4 channels from the receiver(you have to find from the 16 Channel of the Receiver to see which 4 channels is work on).IntroductionThe brand is called DSLRKIT.The remote trigger for studio flashes and outdoor flash is used as the controller of synchronous trigger studio flash of cameras. It consists of a signal sender and a receiver trigger and works by means of the frequency modulation wireless remote control.The signal transmitter adopts the advanced circuit and components, and can transmit the coded FM wireless signa. The circuit of the transmitter has the function of standby and hibernation, thus it has low power consumption; the products can work under the standby mode for more than one year with only one battery; continuously trigger for thirty thousand times. the trigger current is only 0.01MA, which will definitely cause no damage to the flash contact of the camera. The transmitter is applicable to the traditional or digital camera with hot shoe or PC controlling interface.Receiver trigger adopts dry battery for power supply, which is safe, energy-saving, and convenient. The product adopts micro-computer for controlling the decoding, Which has superior anti-interference capability; sensitive reaction speed, the highest synchronous speed can reach 1/500 sec.All the models of the product uniquely have the multi-frequency isolation technique and the self coding matching function by users. Users can freely match and use the sender and the receiver according to the demands, which have four isolated channels to suit for specific shooting environments. Triggers set in different channels can be combined to work or independently work but do not interfere with each other in an efficient distance.Transmitter Receiver Power Source: 23A AC 100-230VOutdoor operating distance (open area):>30MIndoor operating distance:>10MFrequency Channel: 4Operating Frequency: 433MhzOutdoor Synchronous Speed (open area): Max 1/500secIndoor Synchronous Speed: Max 1/250secHow to use: Make sure the channel selector of both transmitter and receiver at same position Insert your flash hot shoe socket into the receiver's hot shoe jack Press the test button on your transmitter. The Fl |
|
|
DSLRKIT PT-04 NE Hot Shoe + Studio Strobe Flash Trigger $12.7 DSLRKIT PT-04NE 4 channels Wireless Flash Trigger SET for Studio Strobe Flash and Hot Shoe Flashthe item is with an umbrella holder,therefore there is no necessory to use a light stand bracket, and the flash effectiveness is the same as the item that is used with a light stand bracket.the transmitter of DSLRKIT brand can trigger all the reciever as long as it is DSLRKIT brand,eg. 4 Channel Transmitter can trigger the reciever from DC-01A, AC-01A, DC-02A, AC-02A, DC-04A, AC-04A, PT-04, DC-16A, AC-16A;eg. 4 Channel Transmitter can trigger 16 Channel Receiver,but only work on 4 channels from the receiver(you have to find from the 16 Channel of the Receiver to see which 4 channels is work on).IntroductionThe brand is called DSLRKIT.The remote trigger for studio flashes and outdoor flash is used as the controller of synchronous trigger studio flash of cameras. It consists of a signal sender and a receiver trigger and works by means of the frequency modulation wireless remote control.The signal transmitter adopts the advanced circuit and components, and can transmit the coded FM wireless signa. The circuit of the transmitter has the function of standby and hibernation, thus it has low power consumption; the products can work under the standby mode for more than one year with only one battery; continuously trigger for thirty thousand times. the trigger current is only 0.01MA, which will definitely cause no damage to the flash contact of the camera. The transmitter is applicable to the traditional or digital camera with hot shoe or PC controlling interface.Receiver trigger adopts dry battery for power supply, which is safe, energy-saving, and convenient. The product adopts micro-computer for controlling the decoding, Which has superior anti-interference capability; sensitive reaction speed, the highest synchronous speed can reach 1/500 sec.All the models of the product uniquely have the multi-frequency isolation technique and the self coding matching function by users. Users can freely match and use the sender and the receiver according to the demands, which have four isolated channels to suit for specific shooting environments. Triggers set in different channels can be combined to work or independently work but do not interfere with each other in an efficient distance.TransmitterReceiverPower Source:23A AC 100-230VOutdoor operating distance (open area): >30MIndoor operating distance:>10MFrequency Channel:4Operating Frequency:433MhzOutdoor Synchronous Speed (open area):Max 1/500secIndoor Synchronous Speed:Max 1/250secHow to use: Make sure the channel selector of both transmitter and receiver at same position Insert the receiver's trigger output plug into your flash's jack Press the test button on your transmitter. The studio light should now flash Insert the transmitter's hot shoe socket into your camera's hot shoe jack (if your camera does not have a hot shoe use a PC sync cord and insert into the socket) You should now be ready to start shootingS |