Barry Idmess Darkroom Equipment

Studio Flash Trigger

Before Learning Photography Lighting Techniques, Know First Studio Lighting Kits

A good photograph does only suggest that the photographer has keen eye with details.  It can also mean that the photographer knows a great deal about photography lighting techniques and have very good studio lighting kits and have very good understanding about studio kits.  Every aspiring photographers know that learning the basics about studio lighting kit is important if they want to capture good portraits inside the studio.

 

The studio lighting kit that you want to purchase is actually dependent on the type of pictures that you want to capture.  Simple studio lighting kits that are available in the market have these typical set up of three lights for back grounding, diffusing, and lighting directly.  There are studio lighting kits that include different assortments of soft boxes, barn doors, snoots, umbrellas, and other items that are used to control and regulate the lights.  Do not forget that when you buy a studio lighting kit, see to it that it includes light stand, trigger remote of the flashbulb.  There are also studio kits that have bonus backdrop muslin and frames.  It is a must that you also think of carrying case for your studio lighting kit if and when you want a portable studio.

 

One of the most important things that every aspiring photographer should know about studio lighting kits and photography lighting techniques is know the basics about studio lighting in general.  Knowing what the most common lighting ideas are will help a newbie photographer decide on what type, model, brand, and features of a particular studio kits or studio lighting kits to buy.

 

There are two most popular lighting systems that every photographer will encounter.  The first one is what is called continuous lighting.  As the name implies, it is a lighting system that never stops.  Every photographer knows that this method utilizes more power and quite hot to work in this lighting condition.  However, this lighting mode allows you to inspect before you take pictures and you will have more leverage in terms of producing quality photographs. There are several studio lighting kits or studio that you order from online shops that sells studio lighting kit.

 

One of the photography lighting techniques that every photographer will know is that there is also another method of lighting set up.  This is called a studio flash. This means that the light only appears when you click on the trigger to capture a picture.  Again, just like with the continuous lighting system, studio flash are also available online.  There are different models to choose from, just ensure that they will complement with your existing studio lighting kits.   There is no rule that you can only choose one lighting system for capturing images.  Having two of these photography lighting techniques will enhance your choices, in terms of flexibility and variety.

 

So before, harnessing your photography lighting techniques and other skills, ensure that you have the right studio lighting kits or studio kit that you can comfortably work on.  It helps to capture good images when you own a piece of equipment that enhances your photography style.

About the Author

Every aspiring photographers know that learning the basics about  studio lighting kit  is important if they want to capture good portraits inside the studio. Simple  studio lighting kits that are available in the market have these typical set up of three lights for back grounding, diffusing, and lighting directly. 

Nice AC-04 4 channel Wireless Studio Flash Trigger+Receiver $18.11 - The remote trigger for studio flashes and outdoor flash is used as the controller of synchronous trigger studio flash of cameras- It consisits of a signal sender and a receiver trigger and works by means of the frequency modulation wireless remote control- Outdoor operating distance: 30M- Indoor operating distance: 10m

4 Channel FM Wireless Studio Flash Trigger PT-04 with Umbrella Holder $19.59 - The remote trigger for studio flash and outdoor flash is used as the controller of synchronous trigger studio flash of cameras- The highest synchronous speed can reach 1/250 sec- Power source: transmitter: 1 X 23A battery ????????????? receiver: 2 x AAA battery

Nice AC-04 Universal Wired Studio Flash Trigger Receiver $11.06 - The wired trigger receiver for studio flashes is used as the controller of synchronous trigger studio flash of cameras- The signal transmitter adopts the advanced circuit and components- It has low power consumption, superior anti-interference capability- High sensitivity, and easy to use

Nice DC-04 Universal 4 Channel Wired Studio Flash Trigger Receiver $9.48 - The wired trigger receiver for studio flashes is used as the controller of synchronous trigger studio flash of cameras- The signal transmitter adopts the advanced circuit and components- It has low power consumption, superior anti-interference capability- High sensitivity, and easy to use

Studio Flash Trigger 3.5mm PC to Dual Hot shoe Adapter $5.41 - 3.5mm PC SYNC to Dual Hot Adapter Adapter- Only using 1 x Trigger Receiver to control 2 x Flash Speedlite at the same time

Nice PT-04NE Hot Shoe Studio Strobe Flash Trigger Umbrella Holder $38.19 Overview:Nice PT-04NE 4 channels Wireless Flash Trigger SET for Studio Strobe Flash and Hot Shoe Flashthe item is with an umbrella holder,therefore there is no necessory to use a light stand bracket, and the flash effectiveness is the same as the item that is used with a light stand bracket.the transmitter of Nice brand can trigger all the reciever as long as it is Nice brand,eg. 4 Channel Transmitter can trigger the reciever from DC-01A, AC-01A, DC-02A, AC-02A, DC-04A, AC-04A, PT-04, DC-16A, AC-16A;eg. 4 Channel Transmitter can trigger 16 Channel Receiver,but only work on 4 channels from the receiver(you have to find from the 16 Channel of the Receiver to see which 4 channels is work on).IntroductionThe brand is called Nice.The remote trigger for studio flashes and outdoor flash is used as the controller of synchronous trigger studio flash of cameras. It consists of a signal sender and a receiver trigger and works by means of the frequency modulation wireless remote control.The signal transmitter adopts the advanced circuit and components, and can transmit the coded FM wireless signa. The circuit of the transmitter has the function of standby and hibernation, thus it has low power consumption; the products can work under the standby mode for more than one year with only one battery; continuously trigger for thirty thousand times. the trigger current is only 0.01MA, which will definitely cause no damage to the flash contact of the camera. The transmitter is applicable to the traditional or digital camera with hot shoe or PC controlling interface.Receiver trigger adopts dry battery for power supply, which is safe, energy-saving, and convenient. The product adopts micro-computer for controlling the decoding, Which has superior anti-interference capability; sensitive reaction speed, the highest synchronous speed can reach 1/500 sec.All the models of the product uniquely have the multi-frequency isolation technique and the self coding matching function by users. Users can freely match and use the sender and the receiver according to the demands, which have four isolated channels to suit for specific shooting environments. Triggers set in different channels can be combined to work or independently work but do not interfere with each other in an efficient distance.Technique Parameter: Transmitter Receiver Power Source 23A AC 100-230V Outdoor operating distance (open area) gt;30M Indoor operating distance gt;10M Frequency Channel 4 Operating Frequency 433Mhz Outdoor Synchronous Speed (open area) Max 1/500sec Indoor Synchronous Speed Max 1/250secHow to use:• Make sure the channel selector of both transmitter and receiver at same position• Insert the receiver's trigger output plug into

DSLRKIT 4 channel Studio Flash Trigger Receiver AC-04 $9 DSLRKIT AC-04B 4 channels FM Receiver for Wireless Flash Trigger StudioNotice: The item must use with the "Transmitter" togetherthe transmitter of DSLRKIT brand can trigger all the reciever as long as it is DSLRKIT brand,eg. 4 Channel Transmitter can trigger the reciever from DC-01A, AC-01A, DC-02A, AC-02A, DC-04A, AC-04A, PT-04A, DC-16A, AC-16A;eg. 4 Channel Transmitter can trigger 16 Channel Receiver,but only work on 4 channels from the receiver(you have to find from the 16 Channel of the Receiver to see which 4 channels is work on). IntroductionThe brand is called DSLRKIT.The remote trigger for studio flashes and outdoor flash is used as the controller of synchronous trigger studio flash of cameras. It consists of a signal sender and a receiver trigger and works by means of the frequency modulation wireless remote control.The signal transmitter adopts the advanced circuit and components, and can transmit the coded FM wireless signa. The circuit of the transmitter has the function of standby and hibernation, thus it has low power consumption; the products can work under the standby mode for more than one year with only one battery; continuously trigger for thirty thousand times. the trigger current is only 0.01MA, which will definitely cause no damage to the flash contact of the camera. The transmitter is applicable to the traditional or digital camera with hot shoe or PC controlling interface.Receiver trigger adopts dry battery for power supply, which is safe, energy-saving, and convenient. The product adopts micro-computer for controlling the decoding, Which has superior anti-interference capability; sensitive reaction speed, the highest synchronous speed can reach 1/500 sec.Transmitter ReceiverPower Source:23AAC 100-230VOutdoor operating distance (open area): >30MIndoor operating distance: >10MFrequency Channel:4Operating Frequency: 433MhzOutdoor Synchronous Speed (open area): Max 1/500secIndoor Synchronous Speed: Max 1/250secHow to use: Make sure the channel selector of both transmitter and receiver at same position Insert the receiver's trigger output plug into your flash's jack Press the test button on your transmitter. The studio light should now flash Insert the transmitter's hot shoe socket into your camera's hot shoe jack(if your camera does not have a hot shoe use a PC sync cord and insert into the socket) You should now be ready to start shootingWeight: 107 g

DSLRKIT 4 Channel Wireless Studio Flash Trigger AC-04 $13 DSLRKIT AC-04B 4 channels FM (Transmitter + Receiver) Set Wireless Flash Trigger for Studioextra receivers if you need:the transmitter of DSLRKIT brand can trigger all the reciever as long as it is DSLRKIT brand,eg. 4 Channel Transmitter can trigger the reciever from DC-01A, AC-01A, DC-02A, AC-02A, DC-04A, AC-04A, PT-04A, DC-16A, AC-16A;eg. 4 Channel Transmitter can trigger 16 Channel Receiver,but only work on 4 channels from the receiver(you have to find from the 16 Channel of the Receiver to see which 4 channels is work on).IntroductionThe brand is called DSLRKIT.The remote trigger for studio flashes and outdoor flash is used as the controller of synchronous trigger studio flash of cameras. It consists of a signal sender and a receiver trigger and works by means of the frequency modulation wireless remote control.The signal transmitter adopts the advanced circuit and components, and can transmit the coded FM wireless signa. The circuit of the transmitter has the function of standby and hibernation, thus it has low power consumption; the products can work under the standby mode for more than one year with only one battery; continuously trigger for thirty thousand times. the trigger current is only 0.01MA, which will definitely cause no damage to the flash contact of the camera. The transmitter is applicable to the traditional or digital camera with hot shoe or PC controlling interface.Receiver trigger adopts dry battery for power supply, which is safe, energy-saving, and convenient. The product adopts micro-computer for controlling the decoding, Which has superior anti-interference capability; sensitive reaction speed, the highest synchronous speed can reach 1/500 sec.TransmitterReceiver Power Source: 23AAC 100-230VOutdoor operating distance (open area):>30MIndoor operating distance: >10MFrequency Channel:4Operating Frequency: 433MhzOutdoor Synchronous Speed (open area):Max 1/500secIndoor Synchronous Speed: Max 1/250sec How to use: Make sure the channel selector of both transmitter and receiver at same position Insert the receiver's trigger output plug into your flash's jack Press the test button on your transmitter. The studio light should now flash Insert the transmitter's hot shoe socket into your camera's hot shoe jack (if your camera does not have a hot shoe use a PC sync cord and insert into the socket) You should now be ready to start shootingWeight: 35 g

DSLRKIT 4 Channel Wireless Studio Flash Trigger DC-04 $13 DSLRKIT DC-04A 4 channels FM (Transmitter + Receiver) Set Wireless Flash Trigger for Studiothe transmitter of DSLRKIT brand can trigger all the reciever as long as it is DSLRKIT brand,eg. 4 Channel Transmitter can trigger the reciever from DC-01A, AC-01A, DC-02A, AC-02A, DC-04A, AC-04A, PT-04A, DC-16A, AC-16A;eg. 4 Channel Transmitter can trigger 16 Channel Receiver,but only work on 4 channels from the receiver(you have to find from the 16 Channel of the Receiver to see which 4 channels is work on). Introduction：The brand is called DSLRKIT.The remote trigger for studio flashes and outdoor flash is used as the controller of synchronous trigger studio flash of cameras. It consists of a signal sender and a receiver trigger and works by means of the frequency modulation wireless remote control.The signal transmitter adopts the advanced circuit and components, and can transmit the coded FM wireless signa. The circuit of the transmitter has the function of standby and hibernation, thus it has low power consumption; the products can work under the standby mode for more than one year with only one battery; continuously trigger for thirty thousand times. the trigger current is only 0.01MA, which will definitely cause no damage to the flash contact of the camera. The transmitter is applicable to the traditional or digital camera with hot shoe or PC controlling interface.Receiver trigger adopts dry battery for power supply, which is safe, energy-saving, and convenient. The product adopts micro-computer for controlling the decoding, Which has superior anti-interference capability; sensitive reaction speed, the highest synchronous speed can reach 1/500 sec.Transmitter Receiver Power Source: 12V 23AAAA x2Outdoor operating distance (open area): >30MIndoor operating distance: >10MFrequency Channel: 4Operating Frequency: 433MhzOutdoor Synchronous Speed (open area): Max 1/500secIndoor Synchronous Speed: Max 1/250secHow to use: Make sure the channel selector of both transmitter and receiver at same position Insert your flash hot shoe socket into the receiver's hot shoe jack Press the test button on your transmitter. The Flash should now flash Insert the transmitter's hot shoe socket into your camera's hot shoe jack (if your camera does not have a hot shoe use a PC sync cord and insert into the socket) You should now be ready to start shootingWeight: 35 g

DSLRKIT PT-04 NE Hot Shoe + Studio Strobe Flash Trigger $12.7 DSLRKIT PT-04NE 4 channels Wireless Flash Trigger SET for Studio Strobe Flash and Hot Shoe Flashthe item is with an umbrella holder,therefore there is no necessory to use a light stand bracket, and the flash effectiveness is the same as the item that is used with a light stand bracket.the transmitter of DSLRKIT brand can trigger all the reciever as long as it is DSLRKIT brand,eg. 4 Channel Transmitter can trigger the reciever from DC-01A, AC-01A, DC-02A, AC-02A, DC-04A, AC-04A, PT-04, DC-16A, AC-16A;eg. 4 Channel Transmitter can trigger 16 Channel Receiver,but only work on 4 channels from the receiver(you have to find from the 16 Channel of the Receiver to see which 4 channels is work on).IntroductionThe brand is called DSLRKIT.The remote trigger for studio flashes and outdoor flash is used as the controller of synchronous trigger studio flash of cameras. It consists of a signal sender and a receiver trigger and works by means of the frequency modulation wireless remote control.The signal transmitter adopts the advanced circuit and components, and can transmit the coded FM wireless signa. The circuit of the transmitter has the function of standby and hibernation, thus it has low power consumption; the products can work under the standby mode for more than one year with only one battery; continuously trigger for thirty thousand times. the trigger current is only 0.01MA, which will definitely cause no damage to the flash contact of the camera. The transmitter is applicable to the traditional or digital camera with hot shoe or PC controlling interface.Receiver trigger adopts dry battery for power supply, which is safe, energy-saving, and convenient. The product adopts micro-computer for controlling the decoding, Which has superior anti-interference capability; sensitive reaction speed, the highest synchronous speed can reach 1/500 sec.All the models of the product uniquely have the multi-frequency isolation technique and the self coding matching function by users. Users can freely match and use the sender and the receiver according to the demands, which have four isolated channels to suit for specific shooting environments. Triggers set in different channels can be combined to work or independently work but do not interfere with each other in an efficient distance.TransmitterReceiverPower Source:23A AC 100-230VOutdoor operating distance (open area): >30MIndoor operating distance:>10MFrequency Channel:4Operating Frequency:433MhzOutdoor Synchronous Speed (open area):Max 1/500secIndoor Synchronous Speed:Max 1/250secHow to use: Make sure the channel selector of both transmitter and receiver at same position Insert the receiver's trigger output plug into your flash's jack Press the test button on your transmitter. The studio light should now flash Insert the transmitter's hot shoe socket into your camera's hot shoe jack (if your camera does not have a hot shoe use a PC sync cord and insert into the socket) You should now be ready to start shootingS

DSLRKIT PT-04 Hot Shoe + Studio Strobe Flash Trigger $15 DSLRKIT PT-04 4 channels Wireless Flash Trigger SET for Studio Strobe Flash and Hot Shoe Flashthe transmitter of DSLRKIT brand can trigger all the reciever as long as it is DSLRKIT brand,eg. 4 Channel Transmitter can trigger the reciever from DC-01A, AC-01A, DC-02A, AC-02A, DC-04A, AC-04A, PT-04A, DC-16A, AC-16A;eg. 4 Channel Transmitter can trigger 16 Channel Receiver,but only work on 4 channels from the receiver(you have to find from the 16 Channel of the Receiver to see which 4 channels is work on). the transmitter of DSLRKIT brand can trigger all the reciever as long as it is DSLRKIT brand,eg. 4 Channel Transmitter can trigger the reciever from DC-01A, AC-01A, DC-02A, AC-02A, DC-04A, AC-04A, PT-04A, DC-16A, AC-16A;eg. 4 Channel Transmitter can trigger 16 Channel Receiver,but only work on 4 channels from the receiver(you have to find from the 16 Channel of the Receiver to see which 4 channels is work on).IntroductionThe brand is called DSLRKIT.The remote trigger for studio flashes and outdoor flash is used as the controller of synchronous trigger studio flash of cameras. It consists of a signal sender and a receiver trigger and works by means of the frequency modulation wireless remote control.The signal transmitter adopts the advanced circuit and components, and can transmit the coded FM wireless signa. The circuit of the transmitter has the function of standby and hibernation, thus it has low power consumption; the products can work under the standby mode for more than one year with only one battery; continuously trigger for thirty thousand times. the trigger current is only 0.01MA, which will definitely cause no damage to the flash contact of the camera. The transmitter is applicable to the traditional or digital camera with hot shoe or PC controlling interface.Receiver trigger adopts dry battery for power supply, which is safe, energy-saving, and convenient. The product adopts micro-computer for controlling the decoding, Which has superior anti-interference capability; sensitive reaction speed, the highest synchronous speed can reach 1/500 sec.All the models of the product uniquely have the multi-frequency isolation technique and the self coding matching function by users. Users can freely match and use the sender and the receiver according to the demands, which have four isolated channels to suit for specific shooting environments. Triggers set in different channels can be combined to work or independently work but do not interfere with each other in an efficient distance.Transmitter Receiver Power Source: 23A AC 100-230VOutdoor operating distance (open area):>30MIndoor operating distance:>10MFrequency Channel: 4Operating Frequency: 433MhzOutdoor Synchronous Speed (open area): Max 1/500secIndoor Synchronous Speed: Max 1/250secHow to use: Make sure the channel selector of both transmitter and receiver at same position Insert your flash hot shoe socket into the receiver's hot shoe jack Press the test button on your transmitter. The Fl

DSLRKIT 4 channel Studio Flash Trigger Receiver DC-04 $8 DSLRKIT DC-04A 4 channels FM Receiver for Wireless Flash Trigger StudioNotice:The item must use with the "Transmitter" togetherthe transmitter of DSLRKIT brand can trigger all the reciever as long as it is DSLRKIT brand,eg. 4 Channel Transmitter can trigger the reciever from DC-01A, AC-01A, DC-02A, AC-02A, DC-04A, AC-04A, PT-04A, DC-16A, AC-16A;eg. 4 Channel Transmitter can trigger 16 Channel Receiver,but only work on 4 channels from the receiver(you have to find from the 16 Channel of the Receiver to see which 4 channels is work on).IntroductionThe brand is called DSLRKIT.The remote trigger for studio flashes and outdoor flash is used as the controller of synchronous trigger studio flash of cameras. It consists of a signal sender and a receiver trigger and works by means of the frequency modulation wireless remote control.The signal transmitter adopts the advanced circuit and components, and can transmit the coded FM wireless signa. The circuit of the transmitter has the function of standby and hibernation, thus it has low power consumption; the products can work under the standby mode for more than one year with only one battery; continuously trigger for thirty thousand times. the trigger current is only 0.01MA, which will definitely cause no damage to the flash contact of the camera. The transmitter is applicable to the traditional or digital camera with hot shoe or PC controlling interface.Receiver trigger adopts dry battery for power supply, which is safe, energy-saving, and convenient. The product adopts micro-computer for controlling the decoding, Which has superior anti-interference capability; sensitive reaction speed, the highest synchronous speed can reach 1/500 sec.TransmitterReceiverPower Source:23A AC 100-230V Outdoor operating distance (open area): >30MIndoor operating distance: >10MFrequency Channel: 4Operating Frequency: 433MhzOutdoor Synchronous Speed (open area): Max 1/500secIndoor Synchronous Speed: Max 1/250secTransmitter not includethe transmitter of DSLRKIT brand can trigger all the reciever as long as it is DSLRKIT brand,eg. 4 Channel Transmitter can trigger the reciever from DC-01A, AC-01A, DC-02A, AC-02A, DC-04A, AC-04A, PT-04A, DC-16A, AC-16A; 16 Channel Transmitter can trigger the reciever from DC-01A, AC-01A, DC-02A, AC-02A, DC-04A, AC-04A, PT-04A, DC-16A, AC-16A;eg. 4 Channel Transmitter can trigger 16 Channel Receiver,but only work on 4 channels from the receiver(you have to find from the 16 Channel of the Receiver to see which 4 channels is work on).eg. 16 Channel Transmitter can trigger 4 Channel Receiver,but only work on 4 channels from the transmitter(you have to find from the 16 Channel of the Transmitter to see which 4 channels is work on).eg. 4 Channel Transmitter can trigger 1 Channel Receiver,but only work on 4 channels from the receiver(you have to find from the 1 Channel of the Transmitter to see which 4 channels is work on).eg. 1 Channel Transmitter can trigger 4 Channel Receiver,but only

Professional 4-CH Studio/Camera Flash Sync Trigger Remote Control $19.7 - Use the transmitter and receiver to control the flashlight- Trigger both the studio and camera flash after connect the PC Sync port- 4-CH control module- Operation distance: 15m- Sync speed: 1/200 s- Receiver powered by 2*AAA batteries (not included)- Transmitter powered by 1*23A 12V battery (included)- PC sync cable includedSpecificationsDimensions: 4.33 in x 1.38 in x 1.34 inWeight: 4.27 oz

AT-16 16-CH Studio Flash Sync Trigger Remote Control $19.2 - Model: AT-16- Use the transmitter and receiver to control the flashlight- Trigger the studio flash after connect the PC Sync port- 16-CH control module- Operation distance: 15~35m- Sync speed: 1/200 s- Receiver powered by 110~230V AC power adapter- Transmitter powered by 1*23A 12V battery (included)- PC sync cable includedSpecificationsDimensions: 2.83 in x 2.13 in x 1.42 inWeight: 8.15 oz

PE-16NE 3-in-1 Wireless Remote Flash Trigger Single Receiver with Umbrella Holder $18.95 - Use global free-change frequency 2.4GHz,? and 16 selectable channels. - Maximum sync speed comes to 1/200s - Receiver with umbrella holder - Trigger the flash light through hot-shoe,? and trigger the studio light through Receiver to 6.35mm Jack Sync Cable or? Receiver to 3.50mm Jack Sync Cable. - Supports multiple outdoor flash light and studio lights. - Maximum operating distance comes to 100 meters. - Receiver battery: 2*AAA batteries (not included) - Functions:Trigger speedlite/Trigger Studio strobe/Play as remote shutter release/Control several flashes - Single receiver only ? ?

DSLRKIT Flash Trigger Receiver PT-04NE Umbrella Holder $12 DSLRKIT PT-04NE 4 channels FM Receiver for Wireless Flash Trigger Studiothe item is with an umbrella holder,therefore there is no necessory to use a light stand bracket, and the flash effectiveness is the same as the item that is used with a light stand bracket.Notice:The item must use with the "Transmitter" togetherthe transmitter of DSLRKIT brand can trigger all the reciever as long as it is DSLRKIT brand,eg. 4 Channel Transmitter can trigger the reciever from DC-01A, AC-01A, DC-02A, AC-02A, DC-04A, AC-04A, PT-04A, DC-16A, AC-16A;eg. 4 Channel Transmitter can trigger 16 Channel Receiver,but only work on 4 channels from the receiver(you have to find from the 16 Channel of the Receiver to see which 4 channels is work on).IntroductionThe brand is called DSLRKIT.The remote trigger for studio flashes and outdoor flash is used as the controller of synchronous trigger studio flash of cameras. It consists of a signal sender and a receiver trigger and works by means of the frequency modulation wireless remote control.The signal transmitter adopts the advanced circuit and components, and can transmit the coded FM wireless signa. The circuit of the transmitter has the function of standby and hibernation, thus it has low power consumption; the products can work under the standby mode for more than one year with only one battery; continuously trigger for thirty thousand times. the trigger current is only 0.01MA, which will definitely cause no damage to the flash contact of the camera. The transmitter is applicable to the traditional or digital camera with hot shoe or PC controlling interface.Receiver trigger adopts dry battery for power supply, which is safe, energy-saving, and convenient. The product adopts micro-computer for controlling the decoding, Which has superior anti-interference capability; sensitive reaction speed, the highest synchronous speed can reach 1/500 sec.All the models of the product uniquely have the multi-frequency isolation technique and the self coding matching function by users. Users can freely match and use the sender and the receiver according to the demands, which have four isolated channels to suit for specific shooting environments. Triggers set in different channels can be combined to work or independently work but do not interfere with each other in an efficient distance.Transmitter Receiver Power Source: 23A AC 100-230V Outdoor operating distance (open area): >30MIndoor operating distance: >10MFrequency Channel: 4Operating Frequency: 433MhzOutdoor Synchronous Speed (open area): Max 1/500secIndoor Synchronous Speed: Max 1/250secHow to use: Make sure the channel selector of both transmitter and receiver at same position Insert the receiver's trigger output plug into your flash's jack Press the test button on your transmitter. The studio light should now flash Insert the transmitter's hot shoe socket into your camera's hot shoe jack (if your camera does not have a hot shoe use a PC sync cord and insert into th

JY-02 16 channel Wireless Studio Flash Trigger $13.91 - Power:23AE 12V(Transmitter);AAA 1.5V x 2(Receiver) - Sync Cord:¦Õ6.35mm/¦Õ3.5mm - Outdoor operation distance: Approx.20-30m - Indoor operation distance:Approx. 20m - Sync speed:1/250s - Channel :16 - Compatible with: - Konica/Minolta Maxxum / Dynax / Alpha 7D, 5D, 8000i, 7000i, 5000i, 3000i, 800si, 700si, 600si, 70, 50, 9, 7, 5, 4, 3, 9xi, 7xi, 5xi

Professional Studio Remote Wireless Flash Trigger (FM310) $16.9 Dimensions: 2.76 in x 1.65 in x 1.38 inWeight: 6.42 oz

Professional Studio Remote Wireless Flash Trigger (RA616) $25.4 Dimensions: 0 in x 1.77 in x 1.18 inWeight: 7.23 oz

DSLRKIT 4 channel Receiver PT-04 for Flash Trigger $11 DSLRKIT PT-04A 4 channels FM Receiver for Wireless Flash Trigger StudioNotice:The item must use with the "Transmitter" togetherthe transmitter of DSLRKIT brand can trigger all the reciever as long as it is DSLRKIT brand,eg. 4 Channel Transmitter can trigger the reciever from DC-01A, AC-01A, DC-02A, AC-02A, DC-04A, AC-04A, PT-04A, DC-16A, AC-16A;eg. 4 Channel Transmitter can trigger 16 Channel Receiver,but only work on 4 channels from the receiver(you have to find from the 16 Channel of the Receiver to see which 4 channels is work on). IntroductionThe brand is called DSLRKIT.The remote trigger for studio flashes and outdoor flash is used as the controller of synchronous trigger studio flash of cameras. It consists of a signal sender and a receiver trigger and works by means of the frequency modulation wireless remote control.The signal transmitter adopts the advanced circuit and components, and can transmit the coded FM wireless signa. The circuit of the transmitter has the function of standby and hibernation, thus it has low power consumption; the products can work under the standby mode for more than one year with only one battery; continuously trigger for thirty thousand times. the trigger current is only 0.01MA, which will definitely cause no damage to the flash contact of the camera. The transmitter is applicable to the traditional or digital camera with hot shoe or PC controlling interface.Receiver trigger adopts dry battery for power supply, which is safe, energy-saving, and convenient. The product adopts micro-computer for controlling the decoding, Which has superior anti-interference capability; sensitive reaction speed, the highest synchronous speed can reach 1/500 sec.All the models of the product uniquely have the multi-frequency isolation technique and the self coding matching function by users. Users can freely match and use the sender and the receiver according to the demands, which have four isolated channels to suit for specific shooting environments. Triggers set in different channels can be combined to work or independently work but do not interfere with each other in an efficient distance.TransmitterReceiver Power Source: 23A AC 100-230V Outdoor operating distance (open area): >30MIndoor operating distance: >10MFrequency Channel: 4Operating Frequency: 433MhzOutdoor Synchronous Speed (open area): Max 1/500secIndoor Synchronous Speed: Max 1/250secHow to use: Make sure the channel selector of both transmitter and receiver at same position Insert your flash hot shoe socket into the receiver's hot shoe jack Press the test button on your transmitter. The Flash should now flash Insert the transmitter's hot shoe socket into your camera's hot shoe jack (if your camera does not have a hot shoe use a PC sync cord and insert into the socket) You should now be ready to start shootingSuitable ForCanon SpeedLite 580EX II, 580EX, 550EX, 540EZ, 520EZ,430EX/EXII, 430EZ, 420EX, 420EZ, 380EX;Nikon SpeedLight SB-900, SB-800, SB-600,

Nice PT-04GY Universal 4 Channel FM Radio Wireless Flash Trigger Set $17.49 - The remote trigger for studio flash and outdoor flash is used as the controller of synchronous trigger studio flash of cameras- Frequency: 433? MHZ- Channels: 4 channels- Sync speed: 1/250s- Strobe and speedlite< 30 m- Transmitter: 23A 12V- Receiver: 2*1.5V AAA

Nice PT-04NE Universal 4 Channel FM Radio Wireless Flash Trigger Set $18.99 - The remote trigger for studio flash and outdoor flash is used as the controller of synchronous trigger studio flash of cameras- Frequency: 433? MHZ- Channels: 4 channels- Sync speed: 1/250s- Strobe and speedlite< 30 m- Transmitter: 23A 12V- Receiver: 2*1.5V AAA

DSLRKIT RF-16NE Flash Trigger for NIKON Umbrella holder $35.8 DSLRKIT RF-16NE Wireless Remote Flash Trigger for NikonThis flash remote trigger can work as flashgun trigger, studio light trigger, and work with extra shutter remote cord, it can remote control the camera, just like the wireless remote shutter release, support half-press focusing and full-press take the picture.The flash sync speed is up to 1/250s. The shutter control mode included single, continuous, BULB and 4sec delay shooting.Transmitter has a 3.5mm input socket witch can connect with your cameras PC sync port. in this case, you can keep on use your hot shoe and trigger the other flashes.Receiver has a 3.5mm output socket.It can be use to connect your cameras shutter remote port(Need extra shutter connect cable), or connect the studio flash via attached 3.5mm to 3.5mm sync cord, or connect with the flash via PC sync cord (need to purchase extra 3.5mm to PC sync cable).And as you can see, in addition to those function, it also have an umbrella holder. So there is no need to use a light stand bracket, and the flash effectiveness is the same as the item that is used with a light stand bracket.RF-16NE is using global free channel 2.4GHz and FSK modulation system to make the performance more stable, and work in bigger distance. Particular saving power design can make the transmitter and receiver battery last more time.Using global free 2.4GHz channel and FSK modulation system, and there's 16 selectable frequency channels.Flash sync speed is up to 1/250s.Support the TTL flashgun wake-up function; you'll never miss any shot opportunity.Fire the flashgun through hot shoe part and fire the studio light through 3.5mm to 3.5mm cable. (you can change 3.5mm to 6.35mm via attached convert adapter)Supports to control multiple flashguns and studio lights at same time.Shutter function mode, included single, continuous, bulb and 4sec delay shooting.Supports to control multiple cameras to take shots at the same time.Operating distance is more than 100 meters. (outdoor without obstacle, we tested the max distance is 200 meters)Ultra-low standby power consumption; transmitter standby time is more than 2 years, and receiver standby time up to 300 hours.Low voltage design, it's able to use rechargeable batteries.Power supply use 2*AAA batteries.(transmitter and receiver)With umbrella holderFunctionsType:Using FSK 2.4GHz Wireless Remote Control SystemOperation Range:100 metersChannel:16Shutter releaseHalf-perss, Full-pressTransmitter stand-by time:2 years or >10000 Timer (2x AAA alkaline cell);Receiver stand-by time:45 Hours(2x AAA alkaline cell)Transmitter compatible with the device under flash trigger mode:Model Compatible deviceRF-16 NETX for CanonCanon EOS: 1D series, 5D series, 7D, 60D, 50D, 40D. 30D, 20D, 10D,600D,550D, 500D, 450D, 400D, 350D,1100D, 1000D Rebel T3i, T3, T2i,T1i,XSi,XS,Xti,Xt,Powershot G10, G11, G12.RF-16 NETXfor Nikon Nikon: D7000, D5000, D5100, D3100, D3000,D3, D700, D2 series, D300 series, D200,D90, D80s D70 series, D60, D50, D40 series

DSLRKIT RF-16NE Flash Trigger for CANON Umbrella holder $35.8 DSLRKIT RF-16NE Wireless Remote Flash Trigger for CanonThis flash remote trigger can work as flashgun trigger, studio light trigger, and work with extra shutter remote cord, it can remote control the camera, just like the wireless remote shutter release, support half-press focusing and full-press take the picture.The flash sync speed is up to 1/250s.The shutter control mode included single, continuous, BULB and 4sec delay shooting.Transmitter has a 3.5mm input socket witch can connect with your cameras PC sync port. in this case, you can keep on use your hot shoe and trigger the other flashes.Receiver has a 3.5mm output socket.It can be use to connect your cameras shutter remote port(Need extra shutter connect cable), or connect the studio flash via attached 3.5mm to 3.5mm sync cord, or connect with the flash via PC sync cord (need to purchase extra 3.5mm to PC sync cable).And as you can see, in addition to those function, it also have an umbrella holder.So there is no need to use a light stand bracket, and the flash effectiveness is the same as the item that is used with a light stand bracket.RF-16NE is using global free channel 2.4GHz and FSK modulation system to make the performance more stable, and work in bigger distance.Particular saving power design can make the transmitter and receiver battery last more time.Features:Using global free 2.4GHz channel and FSK modulation system, and there's 16 selectable frequency channels.Flash sync speed is up to 1/250s.Support the TTL flashgun wake-up function; you'll never miss any shot opportunity.Fire the flashgun through hot shoe part and fire the studio light through 3.5mm to 3.5mm cable. (you can change 3.5mm to 6.35mm via attached convert adapterSupports to control multiple flashguns and studio lights at same time.Shutter function mode, included single, continuous, bulb and 4sec delay shooting.Supports to control multiple cameras to take shots at the same time.Operating distance is more than 100 meters. (outdoor without obstacle, we tested the max distance is 200 meters)Ultra-low standby power consumption; transmitter standby time is more than 2 years, and receiver standby time up to 300 hours.Low voltage design, it's able to use rechargeable batteries.Power supply use 2*AAA batteries.(transmitter and receiver)With umbrella holderFunctions Type:Using FSK 2.4GHz Wireless Remote Control SystemOperation Range:100 metersChannel:16Shutter releaseHalf-perss, Full-pressTransmitter stand-by time:2 years or >10000 Timer (2x AAA alkaline cell)Receiver stand-by time:45 Hours(2x AAA alkaline cell)Dimensions ( W x L x H):Transmitter,76mm x 36 mm x 35mm;Receiver,76mm x 61 mm x 38.7 mmTransmitter compatible with the device under flash trigger mode:ModelCompatible deviceRF-16NETXfor CanonCanon EOS: 1D series, 5D series, 7D,60D, 50D, 40D. 30D, 20D, 10D,600D,550D, 500D, 450D, 400D, 350D,1100D, 1000D Rebel T3i, T3, T2i,T1i,XSi,XS,Xti,Xt,Powershot G10, G11, G12.RF-16NETX for Nikon Nikon: D7000, D5000, D5100, D3100,

Nice PT-04GY Universal 4 Channel FM Radio Wireless Flash Trigger Receiver $10.98 - The remote trigger for studio flashes and outdoor flash is used as the controller of synchronous trigger studio flash of cameras- The signal transmitter adopts the advanced circuit and components- It has low power consumption, superior anti-interference capability- High sensitivity, and easy to use

Nice PT-04NE Universal 4 Channel FM Radio Wireless Flash Trigger Receiver $12.5 - The remote trigger for studio flashes and outdoor flash is used as the controller of synchronous trigger studio flash of cameras- The signal transmitter adopts the advanced circuit and components- It has low power consumption, superior anti-interference capability- High sensitivity, and easy to use

PR-02A Wireless Flash Radio Remote Trigger with Umbrella Holder $26.34 - Working frequency: 433MHz - Maximum sync speed comes to 1/500s - Receiver with umbrella holder - Supports multiple outdoor flash light and studio lights. - Maximum operating distance comes to?30 meters. - Receiver battery: AAA batteries (not included) - Transmitter battery: 23A-12V battery - Functions:Trigger speedlite/Trigger Studio strobe/Play as remote shutter release/Control several flashes - Package?included 1 x receiver 1 x transmitter 1 x cable 1 x user manual? ? ?

PE-16NE 3-in-1 Wireless Remote Flash Trigger Set with Umbrella Holder $30.63 - Use global free-change frequency 2.4GHz,? and 16 selectable channels. - Maximum sync speed comes to 1/200s - Receiver with umbrella holder - Trigger the flash light through hot-shoe,? and trigger the studio light through Receiver to 6.35mm Jack Sync Cable or? Receiver to 3.50mm Jack Sync Cable. - Supports multiple outdoor flash light and studio lights. - Maximum operating distance comes to 100 meters. - Receiver battery: 2*AAA batteries (not included) - Transmitter battery: 1*23A 12V battery (included) - Functions:Trigger speedlite/Trigger Studio strobe/Play as remote shutter release/Control several flashes - Package included 1 x Transmitter 1 x Receiver 1 x Receiver to 6.35mm Jack Sync Cable (for Studio Light/Strobes) 1 x Receiver to 3.50mm Jack Sync Cable (for Studio Light/Strobes) 1 x 2.50mm Jack to PC Sync Cable (Transmitter to Camera) 1 x Trigger safety seat 1 x Transmitter 23A 12V Batteries 1 x PE-16NE User Manual ?

AC-04S1 Wireless Flash Trigger Set for Sony A550 A500 And Minolta Camera $18 The Flash Trigger only for Sony A580/A560/A550/A500 & Minolta CameraThe remote trigger for studio flashes and outdoor flash is used as the controller of synchronous trigger studio flash of cameras. It consists of a signal sender and a receiver trigger and works by means of the frequency modulation wireless remote control.The signal transmitter adopts the advanced circuit and components, and can transmit the coded FM wireless signa. The circuit of the transmitter has the function of standby and hibernation, thus it has low power consumption; The products can work under the standby mode for more than one year with only one batteryContinuously trigger for thirty thousand times. The trigger current is only 0.01MA, which will definitely cause no damage to the flash contact of the camera. The transmitter is applicable to the traditional or digital camera with hot shoe or PC controlling interface.Receiver trigger adopts dry battery for power supply, which is safe, energy-saving, and convenient. The product adopts micro-computer for controlling the decoding, which has superior anti-interference capability; Sensitive reaction speed, the highest synchronous speed can reach 1/500 sec.How to use:Make sure the channel selector of both transmitter and receiver at same positionInsert the receiver's trigger output plug into your flash's jackPress the test button on your transmitter. The studio light should now flashInsert the transmitter's hot shoe socket into your camera's hot shoe jack(if your camera does not have a hot shoe use a PC sync cord and insert into the socket)You should now be ready to start shootingPackage Included:4 Channel Transmitter x1AC-04A Receiver x123A battery(Transmitter inside) x1Sync cord for camera (2.5mm to Male) x16.35mm JACK to 3.5mm Plug PC Sync Adapter x1English Instruction Manual x1Size: 220*150*70 mm

FM Wireless Studio Flash Trigger Set AC-01A(6.35mm Jack) $16.98 - It consists of a signal sender and a receiver trigger and works by means of the frequency modulation wireless remote control.- Operates on radio frequency 433MHz - The transmitter is applicable to the traditional or digital camera with hot shoe or PC controlling interface- The receiver highest synchronous speed up to 1/250s (according to cameras). - If your camera has not hot shoe for fixing the transmitter, you may connect the transmitter to the camera by the PC Sync Cord provided- Package Contents :1x Transmitter 1x Receiver 1x PC Sync Cord for Camera (2.5mm to Male)? 1x 23A battery(Transmitter inside) 1x 6.35mm jack to 3.5mm plug PC sync adapter

DC-04S1 Wireless Flash Trigger Set for Sony A580 A560 And Minolta Camera $17 This wireless trigger is control discreteness for camera to trigger the studio flash synchronously. It's made up of two parts named signal transmitter and receiver. Receiver power type: Battery. The signal transmitter makes use of advanced circuit design and comport, which hot shoe is specially designed for Sony and Minolta, It can transmit wireless signal that is being encoded. It can totally control four different flashes as the picture above showing us. The function of this item is the same as the original one called RD604. How to use:Insert the receiver's trigger output socket into your flash's jack. Press the test button on the transmitter. The studio light should now flash. Insert the transmitter's hot shoe socket into your camera's hot shoe jack. (If your camera does not have a hot shoe, use the included pc sync cord and insert into the camera's pc sync socket)NOTE:This Trigger can NOT work on TTL modeSpecification: Power supply of the signal transmitter: 23A 12V mini-battery (in the transmitter) Power supply of the receiver: two AAA batteries Max available in distance range: 50M (Open fields, no fraise) The output socket has two size are 6.35mm and 3.5mm Package Contents: 4 channel Radio Remote Flash Trigger Transmitter x1 4 channel Radio Remote Flash Trigger Receiver x1 Sync Wire Cable x1 3.5mm Output Socket x1 Heavy-Duty AAA Battery Size: 180*150*50 mm

KING Wireless TTL Flash Trigger Transmitter Receiver for Sony (2*AA) $97.4 Color: BlackFSK 2.4GHz Wireless System, up to 100 meters operating rangeSupports up to 7 wireless channelsUp to 1/8000s sync speedSupports ADL-TTL / TTL / M flash modesUp to 3 difference group and 7 combination on the flash transceiverCompatible Flash: Mechanical flash, studio light and outdoor lightSupports exposure compensation, ae lock, former shade synchronization, after shade synchronization, manual transmitter group flash setSupports high speed sync for studio and outdoor light, well known brand flashes for high speed sync and TTL (METZ / Sigma / Sunpak / Nissin), Well known brand flashes for trigger(does not support high speed sync and TTL flash), firmware upgrade, multi receiver control, flash focusing lightSupports TTL modes/hot shoes/cable interface triggeredInterface: USB, PC cable outlet, hot shoesPowered by 2*AA batteries (not included)Compatible Camera: Sony a550/a580/a350/a500/a700/ka55/a390/a850/a900 etc.Weight: 59gDimension: 88*56*32mmPackage Includes:1 * Transmitter1 * Hot shoe holder1 * BL-3.5mm connection cable (155cm)1 * BL-1/2 connection cable (153cm)1 * English manual1 * Carrying pouch

PE-16NE Wireless Flash Trigger for NIKON D300s/D7000/D5100 With Umbrella Holder $33.2 This flash remote trigger can work as flashgun trigger, studio light trigger, and work with extra shutter remote cord, it can remote control the camera, just like the wireless remote shutter release, support half-press focusing and full-press take the picture. The flash sync speed is up to 1/250s. The shutter control mode included single, continuous, BULB and 4sec delay shooting.Transmitter has a PE input socket witch can connect with your camera's PC sync port. in this case, you can keep on use your hot shoe and trigger the other flashes.Receiver has a PE output socket. It can be use to connect your camera's shutter remote port(Need extra shutter connect cable), or connect the studio flash via attached PE to 3.5mm sync cord, or connect with the flash via PC sync cord (need to purchase extra 3.5mm to PC sync cable).And as you can see, in addition to those function, it also have an umbrella holder. So there is no need to use a light stand bracket, and the flash effectiveness is the same as the item that is used with a light stand bracket.PE-16NE is using global free channel 2.4GHz and FSK modulation system to make the performance more stable, and work in bigger distance. Particular saving power design can make the transmitter and receiver battery last more time.Features1. Using global free 2.4GHz channel and FSK modulation system, and there's 16 selectable frequency channels.2. Flash sync speed is up to 1/250s.3. Support the TTL flashgun wake-up function; you'll never miss any shot opportunity.4. Fire the flashgun through hot shoe part and fire the studio light through PE to 3.5mm cable. (you can change 3.5mm to 6.35mm via attached convert adapter)5. Supports to control multiple flashguns and studio lights at same time.6. Shutter function mode, included single, continuous, bulb and 4sec delay shooting.7. Supports to control multiple cameras to take shots at the same time.8. Operating distance is more than 100 meters. (outdoor without obstacle, we tested the max distance is 200 meters)9. Ultra-low standby power consumption; transmitter standby time is more than 2 years, and receiver standby time up to 300 hours.10. Low voltage design, it's able to use rechargeable batteries.11. With umbrella holderFunctionsType:Using FSK 2.4GHz Wireless Remote Control SystemOperation Range:100 metersChannel:16Shutter release: Half-perss, Full-pressTransmitter stand-by time: 2 years or >10000 Timer (2x AAA alkaline cell)Receiver stand-by time: 45 Hours(2x AAA alkaline cell)Dimensions ( W x L x H): Transmitter: 76mm x 36 mm x 35mmReceiver: 76mm x 61 mm x 38.7 mmWeight:Transmitter: 50 g (with battery)Receiver: 60 g (with battery)1.Wireless flash trigger mode:Transmitter compatible with the device under flash trigger mode:ModelCompatible devicePE-16NETXfor CanonCanon EOS: 1D series, 5D series, 7D,60D, 50D, 40D. 30D, 20D, 10D,600D,550D, 500D, 450D, 400D, 350D,1100D, 1000DRebel T3i, T3, T2i,T1i,XSi,XS,Xti,Xt,Powers

16 channels FM Radio Wireless Flash Trigger For Strobe DC-16A(6.35mm Jack) $17.86 - 16 Channels selectable,wireless control, easy operate. The remote trigger for studio flashes and outdoor flash is used as the controller of synchronous trigger studio flash of cameras. - It consists of a signal sender and a receiver trigger and works by means of the frequency modulation wireless remote control.- Operates on radio frequency 433MHz - The trigger current is only 0.01MA, which will definitely cause no damage to the flash contact of the camera- The transmitter is applicable to the traditional or digital camera with hot shoe or PC controlling interface- The receiver highest synchronous speed up to 1/250s (according to cameras). - If your camera has not hot shoe for fixing the transmitter, you may connect the transmitter to the camera by the PC Sync Cord provided- Package Contents :1x Transmitter 1x Receiver 1x PC Sync Cord for Camera (2.5mm to Male)? 1x 23A battery(Transmitter inside)

4 channels FM Radio Wireless Flash Trigger For Strobe DC-04B(3.5mm Jack) $17.26 - 4 Channels selectable,wireless control, easy operate. The remote trigger for studio flashes and outdoor flash is used as the controller of synchronous trigger studio flash of cameras. - It consists of a signal sender and a receiver trigger and works by means of the frequency modulation wireless remote control.- Operates on radio frequency 433MHz - The trigger current is only 0.01MA, which will definitely cause no damage to the flash contact of the camera- The transmitter is applicable to the traditional or digital camera with hot shoe or PC controlling interface- The receiver highest synchronous speed up to 1/250s (according to cameras). - If your camera has not hot shoe for fixing the transmitter, you may connect the transmitter to the camera by the PC Sync Cord provided- Package Contents :1x DC-4 Transmitter 1x DC-4 Receiver 1x PC Sync Cord for Camera (2.5mm to Male)? 1x 23A battery(Transmitter inside)

2 channels FM Radio Wireless Flash Trigger For Strobe DC-02A(6.35mm Jack) $16.85 - 2 Channels selectable,wireless control, easy operate. The remote trigger for studio flashes and outdoor flash is used as the controller of synchronous trigger studio flash of cameras. - It consists of a signal sender and a receiver trigger and works by means of the frequency modulation wireless remote control.- Operates on radio frequency 433MHz - The trigger current is only 0.01MA, which will definitely cause no damage to the flash contact of the camera- The transmitter is applicable to the traditional or digital camera with hot shoe or PC controlling interface- The receiver highest synchronous speed up to 1/250s (according to cameras). - If your camera has not hot shoe for fixing the transmitter, you may connect the transmitter to the camera by the PC Sync Cord provided- Package Contents :1x Transmitter 1x Receiver 1x PC Sync Cord for Camera (2.5mm to Male)? 1x 23A battery(Transmitter inside)

wholesale FOTGA Wireless flash trigger Set PT-04 TM 4 Channles For Canon Nikon Sony Camera and Flashes $12.09 Flash trigger PT-04 TM

Lumiere L.A. AC RF Slave Strobe Flash Trigger Kit $71.12 Strobe flash trigger kit features no-hassle, remote wireless designDevice's sync-cable connects to camera when necessaryStrobe flash has maximum transmission distance of 33 feetAC power source: 110V-230V 50/60HzDoes not require batteryAllows freedom to locate your studio light at willMeasures 8 inches long x 7 inches wide x 1.5 inches deepIncludes: TransmitterReceiverPower adapterSync cable

Pixel Opas Flash Trigger Transceiver/Radio Slave for Nikon $74.7 Brand: PIXELColor: BlackA professional radio flash trigger and remote shutter release for the cameraSupports 3 different groups and 4 channelsStudio flashes as well as compact flashes are triggered in manual modeFSK 2.4GHz and is compatible with high voltage flashgun and studio flashesThe transceiver switches automatically between transmitter and receiver modeUp to 500m operation rangeSync speed: 1/320sCompatible with Nikon Metz, Sunpak, Sigma, Nissin flashgun/studio lightPowered by 2*AA batteries (not included)Weight: 78gDimension: 152*48*31mmPackage includes:1 * Opas transceiver1 * Protective bag1 * Hot shoe protector1 * Carrying strap (20cm)1 * Connecting cable (DL-3.5 / 40cm)1 * Connecting cable (DL-1/4 / 40cm)1 * Connecting cable (BL-E3 / 40cm)1 * Connecting cable (BL-N3 / 40cm)1 * English user manual